Plumbers 911 Nationwide Blog

4 Signs You Need to Watch Out for in Your HVAC System

Are you experiencing issues with your heating and cooling system?  Then you probably know exactly how important it is to maintain your home’s HVAC unit all year round.

An efficient heating and ventilation system maintains proper airflow and controls indoor temperature in your home. For maximum efficiency, maintenance procedures should be performed by owners or trained technicians. Failing to do maintenance on your heaters and air conditioners may cause inconvenience and problems that will cost you more in the long run.

When You Need to Call a Chicago HVAC Professional

Hvac Service in ChicagoKnow the signs your HVAC system needs repair before it happens, but if you are already experiencing some of these signs, it is probably time to act.

  1. Air conditioning unit is not producing cold air. This is the most obvious sign you need to have your AC fixed. The heat and humidity may become noticeable and start to cause discomfort.
  2. Your AC unit is making unusual noises. Unusual rattle or popping sound coming from your device may mean that you need to get your unit checked and serviced soon.
  3. High energy bills. A HVAC unit that is not functioning well uses more energy and releases that energy where it is not needed. To avoid this to happen, hiring a professional to perform annual maintenance to your system is your best bet. Many of us avoid spending on maintenance. But the truth is, getting your unit serviced regularly will cost you less and help you save energy, than hiring someone to replace a major component sooner or later.
  4. Air conditioning water leakage. Some of the possible causes of AC water leaks are clogged or disconnected drain pipe, clogged air filter and if unit is low on refrigerant. This can lead to bigger problems if not fixed promptly.

Other signs are subtle, but it can tell you anyhow that you need to hire a HVAC service provider:

Your HVAC Checklist from a Trusted Plumber in Chicago

  • Your heating and cooling unit is more than 15 years old. Your device has been with you for quite a long time but sadly, it’s time for it to go. A new system is guaranteed to provide better humidity reductions and comfort. Call an expert and have that old HVAC system replaced with a new one.
  • Repairs become more and more frequent.
  • Excessive dust in your home. If you notice lately that your house gets dusty faster than before, your defective unit may be the culprit.

Now that you know the signs, it is time to pick up that phone and call in a professional HVAC Service in Chicago. Don’t hire just any HVAC contractor. Look for a reputable company that provides safe and efficient solution to your problem. Make sure that you are hiring only licensed, bonded and insured plumbers in Chicago, Illinois.

Plumbers 911 IL is the right one to call if you need HVAC Service in Chicago. Our certified technicians  are sure to detect problems and its causes and come up with a solution that will help you say goodbye to the problem forever.

Posted on: October 10, 2019

The Basics of Faucet Repair for Overland Park Homeowners

Faucet Repair overland parkOur bathrooms and kitchens often become targets of lime and hard water stains.  Taking these off can be a hard job. Read this article to find out easy steps how to deal with these.

Pesky lime and hard-water buildup can be hard to remove and frustrating to work with.  There are several solutions, however, that will dissolve calcium and lime deposits that accumulate over time.  Just as important though, is to determine if a leaky faucet is causing the buildup.  The stains can be a sign that your faucet is in need of repair.  This article will provide information on how to remove stains and then how to prevent them in the first place.


  • Acids. Acid will dissolve lime and mineral stains.  Acid can be found in household products like vinegar or lemon juice.  Simply rub into the stain to dissolve the buildup.  Take care not to leave the acid on for too long, as it may corrode the surface of the faucet or sink.
  • White vinegar and baking soda. For extremely stubborn stains, mix vinegar and baking soda to create a paste.  Scour the surface using a soft brush or a sponge.  This method is especially good at removing hard water stains.
  • Commercial Products like C-L-R. Commercial products like C-L-R will remove calcium, lime, and mineral buildup.  Follow all instructions when using these products.

Next steps:

  • Repair drips. Replace the washer inside the faucet at the base of the handle.  The new washer must be the exact right size, or it will not create an adequate seal to prevent water from dripping out of the handle.  Take the old washer with you to a hardware store in order to purchase the right size washer.
  • Repair leaks. Replace a faulty O-ring.  The O-ring prevents water from leaking out around the spout.  If this ring is deteriorated, water will appear at the base of the faucet spout every time you run the water.  To repair, remove the spout and replace the O-ring with a new ring of the exact same size.  Then reassemble the faucet.Make sure the faucet’s packing nut is tightly secured.  Install new packing, which is the soft wiring that wraps around the stem of the faucet.  Then apply a coat of petroleum jelly on the threads of the stem and the packing nut.

Once stains have been removed, check to make sure that a drip or a leak is not causing the buildup. A drip occurs when the water is turned off.  A leak occurs when the water is on and is leaking out of the base of the spout.  Call in an expert if you need help, like Plumbers 911.

Plumbers 911: The Company to Call When You Want Real 24-Hour, Emergency Service

Plumbers 911 is a reputable plumbing company in Kansas. We have worked hard to recruit and train the most highly skilled contractors and plumbers in the area.  By calling us, you get 24/7 emergency repairs, so there will always be a qualified professional ready to come out to your home to handle a variety of plumbing issues.

  • Routine maintenance
  • Fixture replacement
  • Leak detection
  • Stopped drains
  • Appliance removal and installation
  • Sewer cleaning and treatment

As homeowners ourselves, we know that problems arise at inconvenient times—on holidays, when business hours are over, etc.  When you call with an urgent matter, our operators will answer immediately and send someone right away, rather than answering now and sending a plumber the next morning, as some emergency contractors do.

Our technicians will solve your plumbing issues, in the middle of the night, on holidays, on the weekend, or over the lunch hour.

They offer services:

  • 24 hours a day
  • 365 days a year
  • Within about an hour

We have created a network of the best, licensed technicians to handle plumbing issues quickly, and with expert knowledge.  Only highly skilled, credible professionals can become part of the network that forms Plumbers 911.

With such high expectations for our plumbing contractors in Overland Park and such rigorous hiring criteria, we have assured its customers that they’re getting the very best.  Getting emergency service doesn’t mean you have to sacrifice the quality.

  • Licensed and accredited
  • Hundreds of hours of on-the-job training
  • Passed thorough background checks

Call us today for further information on faucet repair in Overland Park or to schedule a service!




Posted on: September 29, 2019

Frozen Pipes 101: Things to Do Before and During Winter

burst pipe repair Kansas CityDipping temperatures in Kansas often cause problems in the water system’s pipelines. Majority of the state is usually exposed to varying temperatures below freezing hence the need for every affected household to prepare themselves for costly pipeline damages.

It is best to arm yourself with these information if you want to avoid spending much on pipeline repair and water damage.

In reality, the ice forming outside a pipe do not really cause the pipe to freeze or burst. The ice’s radial expansion against the pipe’s wall is not the real cause of this, rather, the frozen water inside the pipe. Due to continuous freezing, the water inside the pipes expands causing the water pressure to increase downstream between the faucet at the top and the ice blockage down below. The increase in water pressure is what’s causing pipe breakage.

In Kansas, pipes start freezing at 20°F and weather authorities have been advising residents to take action even before the cold weather hits the region.

Things to Do Before Winter

Know Where your Shut-off Valve Is. Freezing weather or not, it is a must that you know the location of your water shut-off valve. This is important so when a pipe breaks, you would immediately know where to find it to shut it off. Normally this is installed in the crawl space or basement, beside a wall.

Have Direct Access to your Curb Stop Valve. Know where this is on your street so you know where to guide the plumbers in case of any plumbing emergency.

Drain Water Sprinklers Before the First Freeze Hits. During this season, the alternate freezing and thawing in the water system could create weak spots and cracks in the pipelines that thus trigger mini-geysers or underground leaks.

Drain Hoses and Disconnect Them from Outdoor Faucets. Make sure to turn off outdoor faucets and disconnect the hoses to ensure that they are fully drained before the winter season starts. Most houses have water valves for their outdoor water supply, turn yours off and totally drain the ones in the pipes and hoses because any amount of freezing water could damage the pipes.

Winterize Unheated Homes or Properties. If you have vacant homes or properties, make sure that they are winterized to avoid any water damages in spring. If these are left unheated and unfixed during winter, the water servicing could freeze and cause burst pipes and water damage.

Water Pipe Insulation. Ensure that pipes inside unheated basements, near windows and those attached to exterior walls are wrapped in insulation. Note that these are the ones that quickly freeze at the first sign of winter.

Things to Do When Winter Comes

Doors. Keep garage doors tightly closed to minimize the freezing air from coming in. Most pipes are routed here making them vulnerable to freezing. It is also highly recommended that cabinet doors leading to pipes like sinks are kept open to keep them warm from the heater inside homes.

Keep 1 or 2 Faucets Minimally Flowing. To keep water molecules moving, open 1 or 2 faucets open. This reduces the chance of freezing water inside pipes. Anyway, you can reuse this water for other household purposes. Just make sure that it doesn’t go to waste.

Thermostat. If you are going somewhere, ensure that the thermostat inside your home is maintained at 65 degrees.

Things to do When a Pipe is Frozen

You will notice that one of your pipes is already freezing because there would be decrease on your water flow. Do not wait for long, thaw your pipes safely yourself or call a reliable Kansas plumber as soon as possible.

If you are planning to thaw the frozen yourself, you may use a hair dryer to slowly unfreeze the water inside the pipes. With this process, it is important that slow and steady heat is used to avoid the sudden gush of water when the pipes thaw. Ensure that you are not standing on any water puddle when using this to avoid electrocution.

Thawing a frozen pipe is not an easy task so it is highly recommended to call a licensed plumber for any burst pipe repair in Kansas City. Plumbers 911 has a network of reliable service technicians who can do the job for you efficiently and quickly. They have plumbers available 24/7 even during holidays to solve plumbing problems such as toilet repair in Kansas City, leak detection in Kansas City, home remodeling in Kansas City, mainline video services in Kansas City, even sub-metering installation and repair in Kansas City!

Posted on: September 28, 2019

Common Questions to Ask a Fire Sprinkler Installation Plumber in Lawrence

fire sprinkler installation plumber in Lawrence MAFire sprinklers are important in keeping large buildings in Lawrence, MA safe from fire. It will help you a lot as a property owner if you have a basic working knowledge of how it works. And though your contractor will do all of the dirty work such as installation and maintenance, it would still be best for you to know the fundamentals of fire sprinkler systems. Hence, this post features some questions that you can ask a fire sprinkler installation plumber in Lawrence.

Are Fire Sprinkler Systems Effective?

Do fire sprinkler systems really work? According to the National Fire Protection Association (NFPA), property damages caused by fire are lowered to an astounding 50 to 60% due to the help of fire sprinkler systems. Moreover, NFPA research found out that the risks of dying in a fire is reduced with a well-maintained and tested fire sprinkler system. Here are the numbers per industry:

  • Hotels – 91%
  • Assisted living facilities – 75%
  • Retail shops and office buildings – 74%
  • Manufacturing facilities – 60%

The most astounding result of all is that there have been no multi-casualty deaths in residences with fire sprinkler systems installed.

How Much Does It Cost?

Fire sprinkler systems are not that expensive. Expect to pay a fire sprinkler installation plumber in Lawrence around $1 to $2 per square foot on the average (pump not included).

How Does It Work?

You know how fire sprinkler heads are triggered by a fire? There’s a small vial of colored liquid inside it that expands when heated. It then breaks and lets that water from behind it to flow out. The colors of each vial correspond to different degrees of heat:

fire sprinkler installation in Lawrence

  • Orange – 135 degrees Fahrenheit
  • Red – 155 degrees Fahrenheit
  • Yellow – 174 degrees Fahrenheit
  • Green – 200 degrees Fahrenheit
  • Blue – 286 degrees Fahrenheit
  • Purple – 360 degrees Fahrenheit
  • Black – 440 degrees Fahrenheit

What Is The Best Type of Fire Sprinkler System?

There are different types that you can choose from:

  1. Wet Pipe – This is the most common type and most buildings utilize this system. It holds water in the pipes behind the sprinkler head.
  2. Dry Pipe – This type is used in areas where the cold temperature can freeze the water in the pipes. Pressurized gas and water are held outside the pipes until the sprinkler heads are triggered.
  3. Deluge – Like in wet pipe fire sprinklers, water is stored in the pipes but the fire sprinkler heads are kept open. A fire alarm will activate the system and it needs to be manually closed to switch off the system. This type is normally used in warehouse bay entryways, high rise windows, and areas where fire could spread rapidly.
  4. Pre-action – This type is a combination of wet and dry pipe types. Water is not stored in the pipes. Yet, when a fire is detected, it quickly fills the pipes before the sprinkler heads open.

Plumbers 911 Can Refer a Fire Sprinkler Installation Plumber in Lawrence

Plumbers 911 is a nationwide referral system for plumbing professionals. We can send a licensed Lawrence plumber to your place in as a little as an hour. Call us immediately for help.


Posted on: September 25, 2019

Leaking Shower Faucet DIY Repair Guide for Chicago Homeowners

 leaking-shower-faucetAre you annoyed with your leaking shower faucet? Don’t be. Over time, plumbing fixtures or their components wear out. That’s just normal.

So instead of spending the whole day irritated, just call your trusted neighborhood plumber or try this DIY guide to put a stop to the leak! In case you are good with DIY plumbing, read on and use this as your reference.

1. Before working on your shower, you’ll have to turn the water supply valve off. If your shower doesn’t have its own valve, turn your main water supply off. Do this to prevent flooding your work area.

2. When you’ve already turned the water supply off, you’ll have to turn the shower on to relieve the remaining water inside the pipes. When there’s no more water flowing out of the shower, you may proceed with the repair.

3. Inspect the faucet assembly. Look for the decorative cap on the faucet handle and use a putty knife to pry it off. You may also use a flathead screwdriver or a similar tool that you have handy. After you remove the cap, use a screwdriver and loosen the screw.

4. Afterward, pull the faucet handle from the wall. If it won’t budge, you can use a handle puller that’s available from any plumbing shop. If your faucet has an escutcheon plate, it must go too.

5. Once the faucet handle has been removed successfully, a packing nut will be uncovered. Get a pair of pliers and remove the valve stem shaped like a hexagon.

6. Once you’re done, you should see a washer at the bottom of the valve stem. Inspect it to find out if it’s defective or worn out. Replace it with a new one if it is.

7. After replacing the washer, check the brass component where it’s supposed to be attached. Make sure that the washer fits properly to it. Turn the faucet on and check if the new washer solved the problem. If the fixture will still leak, the valve seat stem or the brass component is already damaged.

8. Grind the valve seat stem until it is smooth or just replace it. Make sure that you’ll replace it with the right one. You can bring the old, damaged seat to the shop to get the correct replacement part. After the replacement of the valve seat stem, clean the rest of the faucet assembly prior to re-installation.

9. Re-assemble the faucet parts one by one, taking time to grease the stem threads. When you’re done and all the connections are tight, turn the water supply valve on once again and test the faucet. This should hopefully resolve the leak problem. If you ever discover that your tub faucet is leaking as well, read our blog on how to fix a leaky tub faucet. It’s a helpful guide that you can use, too.

If you ever encounter this plumbing problem at home, just call our most trusted plumbers in Chicago. Plumbers 911 has a network of licensed and trained contractors that provide reliable plumbing services in the Illinois area.

Posted on: September 24, 2019