Tips When Doing Toilet Repairs

toilet repairsThe toilet is a durable plumbing fixture that may last for years or decades even. However, we all know that toilet problems are the most terrible plumbing issues for homeowners. Even the bravest of men dread the very thought of unclogging the throne — err the toilet. But then again, that’s only one plumbing problem amongst the many that you’d have to deal with. There’s still a lot more that you need to watch out for and that is why knowledge, familiarity and basic plumbing skills are important. Check out these tips that will come in handy during toilet repairs.

1. Phantom Flushing


This isn’t a rare toilet problem. Many homeowners experience phantom flushing which involves the presence of sound similar to when a toilet is flushed. What’s inconvenient about this is that the fixture will intermittently make that flushing sound even when no one’s using it. What causes the problem could be a damaged flapper or a bad flapper seat. The malfunction results to a leak between the tank and the bowl, therefore making water leak and causing the strange reverberation which can strike anytime. To fix this plumbing problem, the flapper seat must be cleaned or replaced when it’s already too worn out to work.

2. Weak Flushing


Weak flushing is another problem that you have to be ready for. There are times when you’ll notice that waste materials take a long time to get flushed — even when you only peed. Such a problem may be caused by clogged jet holes. Just get a coat-hanger and poke through those holes to get rid of the sediments and mineral deposits that have accumulated in there. Be extra careful so you won’t scratch the bowl.

3. Trickling Water


If you ever hear water trickling into the toilet tank, there’s probably a problem with the supply lines, the float, the refill tube, the ballcock or the inlet valve. This issue is caused by a leak somewhere in the assembly or a component that should be adjusted. To fix the leak, make sure that the float will stick and that the refill tube isn’t installed too far into the overflow tube. Remember that the refill tube should only go as far as a quarter of an inch below the overflow tube. Make the necessary adjustments and if these parts won’t get fixed, the only solution left is to replace them.

4. Leaking Seals


If your toilet leaks somewhere at the base or between the tank and the bowl, you’ll have to check the seals. A leak between the tank and the bowl will result to water shooting from this area. A leak at the base will cause a forever wet bathroom floor and sooner or later, a wobbly toilet. Tighten the seals and if they’re already worn out, replace them.

5. Clogs


Clogs are the most common toilet problems experienced by property owners. It appears that the more the toilets are used and exposed to different waste substances, the more they get clogged. Always have a cup plunger ready in case blockages occur. If the plunger won’t do the trick, rely on a plumbing snake. These two are the most efficient plumbing tools that you can use to eradicate stubborn clogs.

We hope that you loved reading these tips when doing toilet repairs. If toilet problems persist, just call your trusted Annapolis plumber. Plumbers 911 Washington DC provides toilet repair services in Annapolis MD as well as plumbing fixture installation, plumbing appliance installation, hydrojetting, backflow prevention and many more! Call us now at (877) 932-5325 to schedule a service!

Learn all about our fast toilet repair services! Watch this video now.

Posted on: March 5, 2015