How To Repair A Toilet Flange Properly

how-to-repair-a-toilet-flangeDo you know what a toilet flange is? It is an important component of the toilet that looks like a flat, circular piece of rubber, PVC or metal. It has holes at its sides where the nuts and bolts would fit. This part of the toilet is vital as it is the one responsible for securing the fixture to the floor and keeping the connection between the bowl and the drain pipe free from leaks. Now since the flange is also vulnerable to wear and tear, a time will come when you’ll notice water coming out of the base of the toilet. You may also discover that the fixture is already wobbly or no longer steady. These are indicative of a damaged or worn out toilet flange. Here’s how the problem is fixed by professionals!

1. To avoid flooding your bathroom, turn the toilet’s water supply valve off. Flush the toilet to empty the tank then scoop out any standing water left inside. In other words, just ensure that it’s totally empty.

2. Now inspect the bottom of the toilet and locate the screws that connect it to the floor. Loosen the bolts and then scrape off the seal that secures the toilet to its flange. After removing the wax seal, carefully tip the bowl to both sides to loosen it up. Ask someone to help you lift it from the floor and set it aside. To avoid damage to your toilet, put it on top of clean rags or old towels.

3. Once done, proceed with the cleaning of the installation area. The old wax should be discarded by using a putty knife or any similar tool. The installation area should be thoroughly cleaned to guarantee that the connection will turn out leak-free.

4. Inspect the old toilet flange. Is it cracked, broken or worn out? If it’s still in good condition, you may still use it. If it’s not, it must be replaced.

5. Also inspect the bolts and nuts. If they are already worn out, they must be replaced, too. In most cases, they are just loose. Tighten them and then reinstall the toilet should you find that no part is damaged. Don’t forget to check for leaks.

6. Now if the flange is damaged as you suspected, you must acquire a spanner flange. That’s the semi-circle component of the toilet flange that can be replaced. Unscrew that, set the bolts aside and install the new spanner in place. Drill it to the bathroom floor to make the connection secure.

7. If, on the other hand, the entire toilet flange is no longer usable, replace it completely. When the installation area is clean, carefully pour some concrete in and let it set. Position the toilet flange on the concrete and then screw it there.

8. When you’re one, place the wax gasket on its proper place. It must be aligned with your toilet flange to avoid water and waste from seeping out of the base of the fixture.

9. Carefully put the toilet bowl back in place. Again, ask another person to carry the fixture so you won’t accidentally drop it. Don’t forget to tighten the bolts, too.

10. Proceed with the re-connection of the supply line to the toilet tank. Afterward, turn the water valve on and let the tank get filled up. To test the installation, flush the tank and observe the toilet base. If you no longer see water seeping out, you have successfully gotten rid of the leak!

We hope that you learned how to repair a toilet flange through our blog today. If the problem persists, call professional Westwood Hills plumbers. Plumbers 911 Kansas provides reliable plumbing services in Westwood Hills KS including leak detection, backflow prevention, septic tank maintenance, sump pump installation, sewer camera inspection and many more! Call us at 816-326-8643 to schedule a service!

Looking for top-notch toilet repair services? Watch our video and find out why we’re the best plumbing company to hire in Kansas!

Posted on: August 5, 2015