Fire sprinklers are important in keeping large buildings in Lawrence, MA safe from fire. It will help you a lot as a property owner if you have a basic working knowledge of how it works. And though your contractor will do all of the dirty work such as installation and maintenance, it would still be best for you to know the fundamentals of fire sprinkler systems. Hence, this post features some questions that you can ask a fire sprinkler installation plumber in Lawrence.
Are Fire Sprinkler Systems Effective?
Do fire sprinkler systems really work? According to the National Fire Protection Association (NFPA), property damages caused by fire are lowered to an astounding 50 to 60% due to the help of fire sprinkler systems. Moreover, NFPA research found out that the risks of dying in a fire is reduced with a well-maintained and tested fire sprinkler system. Here are the numbers per industry:
- Hotels – 91%
- Assisted living facilities – 75%
- Retail shops and office buildings – 74%
- Manufacturing facilities – 60%
The most astounding result of all is that there have been no multi-casualty deaths in residences with fire sprinkler systems installed.
How Much Does It Cost?
Fire sprinkler systems are not that expensive. Expect to pay a fire sprinkler installation plumber in Lawrence around $1 to $2 per square foot on the average (pump not included).
How Does It Work?
You know how fire sprinkler heads are triggered by a fire? There’s a small vial of colored liquid inside it that expands when heated. It then breaks and lets that water from behind it to flow out. The colors of each vial correspond to different degrees of heat:
- Orange – 135 degrees Fahrenheit
- Red – 155 degrees Fahrenheit
- Yellow – 174 degrees Fahrenheit
- Green – 200 degrees Fahrenheit
- Blue – 286 degrees Fahrenheit
- Purple – 360 degrees Fahrenheit
- Black – 440 degrees Fahrenheit
What Is The Best Type of Fire Sprinkler System?
There are different types that you can choose from:
- Wet Pipe – This is the most common type and most buildings utilize this system. It holds water in the pipes behind the sprinkler head.
- Dry Pipe – This type is used in areas where the cold temperature can freeze the water in the pipes. Pressurized gas and water are held outside the pipes until the sprinkler heads are triggered.
- Deluge – Like in wet pipe fire sprinklers, water is stored in the pipes but the fire sprinkler heads are kept open. A fire alarm will activate the system and it needs to be manually closed to switch off the system. This type is normally used in warehouse bay entryways, high rise windows, and areas where fire could spread rapidly.
- Pre-action – This type is a combination of wet and dry pipe types. Water is not stored in the pipes. Yet, when a fire is detected, it quickly fills the pipes before the sprinkler heads open.
Plumbers 911 Can Refer a Fire Sprinkler Installation Plumber in Lawrence
Plumbers 911 is a nationwide referral system for plumbing professionals. We can send a licensed Lawrence plumber to your place in as a little as an hour. Call Plumbers 911 Boston at (855) 550-9911 today to set an appointment.
Meanwhile, watch this video to know more about Plumbers 911 Boston: