With proper care and maintenance, you should be able to enjoy the benefits of having an electric hot water heater. However, we cannot deny the fact that just like any other machine or appliance, water heaters also malfunction. There are a lot of things that can affect the overall condition of heating units including age, use, maintenance or the lack thereof and installation among many others. If you ever experience any kind of trouble or if you ever want to know how to diagnose hot water heater problems, use this article as your guide!
1. No Hot Water
If no hot water will come out of your plumbing fixtures and appliances, this may indicate an issue with a tripped circuit breaker or a blown fuse. These two are essential in supplying power to the water heater so when they’re damaged, the unit won’t operate at all. This water heater problem may also be caused by a damaged heating element or electric thermostat. To make the water heater work again, the blown fuse must be replaced; the circuit break must be rest and damaged heating elements or thermostat should be replaced, too.
2. Water Is Too Hot
On the contrary, water that’s too hot is another thing. You should be very careful to avoid scalding. Remember, hot water will easily burn your skin in a matter of seconds. Check the thermostat first and make sure that it’s not configured too high. If it is, lower it down. When you’ve already done that and nothing happens, the heating elements of the water heater should be inspected.
3. Not Enough Hot Water
If your water heater isn’t providing you with enough hot water, the first thing that you have to figure out is if it’s capacity is actually enough for your needs. If you’ve added more fixtures or have new family members in the house, then it’s possible that the water heater tank you have is already insufficient for your demands. Consult a licensed plumber for an upgrade.
Another thing that must be done is to inspect the cold and hot water supply lines if they are improperly installed. Check for cross connections as well. The heating elements as well as the thermostat should also be checked for damage.
4. Rusty Water
If your water heater supplies hot water that’s rusty, check the tank. There’s an anode rod at the top that’s supposed to prevent corrosion inside the tank. If it’s already coated with calcium or only about an inch thick, replace it.
5. Foul-Smelling Water
If the water has a rotten smell, you should flush and clean the tank. The smell is indicative of bacteria presence so this problem must be attended to right away. After flushing the tank, it should be cleaned with a hydrogen peroxide solution that will eradicate the bacteria inside. Replace the anode rod as well.
6. Whining Noise
If you ever hear a whining noise coming from your water heater, you must flush the tank immediately. The noise indicates the presence of scale inside the tank, possible on the heating elements.
7. Popping Or Rumbling Noise
If your water heater produces a popping or rumbling noise, you must flush the tank. Yes, flush the tank because there are sediments that have accumulated at the bottom.
8. Water Heater Leaks
Leaks are also among the most common issues that you’ll encounter. These may result from damaged T&P valve; excessive pressure or overheating; heating elements with loose bolts; supply pipes that cracked; loose plumbing connections; corroded water heater tanks or damaged gaskets.
We hope that you learned valuable tips about electric water heater troubleshooting. If you’re not skilled in plumbing, just call the most trustworthy Edwardsville KS plumbing experts to avoid accidents. Plumbers 911 Kansas provides reliable emergency services in Edwardsville KS including water heater repair in Edwardsville KS, plumbing appliances installation in Edwardsville KS, Edwardsville KS plumbing fixture repair, faucet repair services in Edwardsville KS and many more! Call us at 816-326-8643 to schedule a service!
Learn about our valuable emergency plumbing services! Watch our video below!