Category: Sump Pumps

Why Do Houses Have Sump Pumps?

why-do-houses-have-sump-pumps“Why do houses have sump pumps?” We have been asked this question too many times already. And our answer actually depends with another set of questions. For instance, do you often experience flooding in the basement? Is your home constructed in an area where the water table level is higher than your basement? Do you often discover pools of water in the basement after a continuous rain? If your answer is yes to any of our questions, then you also need a sump pump at home.

What are sump pumps?

Sump pumps are plumbing devices that are specially designed to remove the water that accumulate in a sump basin. These are usually installed in basements of homes where flooding usually occurs. The water that comes from the basement waterproofing system, from rain or ground water is collected in the pit or sump. The machine will pump and dispose the collected water to an outdoor drain, a dry well or a storm drain. Long ago, sump pumps were permitted to dispose water to sanitary sewers. But because of the dangers of overwhelming the sewage treatment systems in cities and municipalities, it was later on restricted.

How do they work?

The sump pump mechanism is not too complicated. When the sump is filled with water, the motor of the device will automatically turn on through the help of a float activator. In other models, the pressure sensor is responsible for the activation. Anyway, the float activator works like the toilet tank float. A ball is kept afloat in the pump and when the water rises, the ball shifts the arm of the pump.

Now when the device activates, it will pump the water and carry it to your dry well or the city storm drain with the help of a one-way valve. This check valve is located at the end of the pump and is responsible for preventing the water from flowing back into the pit.

How do you maintain them?

Sump pumps require maintenance and care. Here are some tips that you should find handy!

1. Inspect the inlet screen and remove any residue or debris that are trapped there. Do this about 3 to 4 times annually.

2. Inspect the sump and remove sediments, debris or stones that may cause clogging.

3. Make sure that the water pumped by the machine is actually being disposed to the appropriate place.

4. To ensure that the float is at tip-top shape, inspect it for damages and obstructions. Make sure that it’s always working. Here’s a simple test. Pour a bucket of water into the pit and wait for see if the machine will activate.

5. Guarantee that the sump pump’s discharge pipe won’t freeze during winter months. Ensure that a vent line is hooked to it and check the vent for clogs.

We hope that you learned why do houses have sump pumps through our blog today. Also check out our article that features maintenance tips for basement sump pump systems. And if you ever need a sump pump installed or repaired, just call the best local plumbers in the US. Plumbers 911 provides reliable plumbing services in the US including sump pump repairs in the US, backflow prevention in the US, septic tank installation in the US, toilet repairs in the US and many more!  Call us at Miami (305) 928-6854, Fort Lauderdale (954) 361-1786, West Palm Beach (561) 331-5597, Washington DC (877) 932-5325, Boston (855) 550-9911, Missouri (816) 326-8643 or Kansas (816) 326-8643 to schedule a service now!

Meanwhile, learn about our excellent plumbing services in Florida! Watch our video now!

Posted on: September 9, 2015

What Are Basement Sump Pumps?

basement-sump-pumpsIs your house built on an area where the basement is lower than the water table level? Do you often experience flooding in your basement? Do you often encounter water pooling in the basement after continuous, strong rains? If your answer is “yes” to any of these questions, then a basement sump pump is what you need!

What is a basement sum pump?


A sump pump is a device that’s used to get rid of the water which accumulates in a sump basin, usually found in the basement of homes. The water collected by the sump basin usually comes from ground water, rain or from the basement waterproofing system. The pump reduces if not totally eradicates the dampness in this part of the house. From the sump basin, the water gets transported or disposed to a dry well, an outdoor drain or a dry well. In the earlier years, sump pumps were allowed to dispose the water into sanitary sewers but that has changed because of the possibility of overwhelming municipal or city sewage treatment systems.

What are the types of sump pumps?


There are actually two kinds of sump pumps that can be used at home: pedestal and submersible pumps. The pedestal pump, as the name implies, has its motor mounted above the sump. The submersible pump, on the other hand, is completely mounted inside the sump. To avoid electrical short circuiting, the sump is sealed. If you’re interested about the efficiency and durability of these two types, research says that pedestal pumps commonly last longer — for about 25 to 30 years. That is, if they’re installed and maintained properly. They are also cheaper and easier to disassemble. Meanwhile, submersible pumps are believed to last for about 5 to 15 years only. They are also more costly and may even get clogged because of being submerged in the sump.

How do sump pumps work?


It’s pretty simple. When the sump gets filled with water, the pump automatically turns on. It will pump the liquid out of the sump basin and into the appropriate place such as the municipal storm drain or your own dry well in the yard. This pipe that carries the water features a one-way valve (check valve) at the end of the pump which is responsible for keeping the liquid from flowing back into the sump basin. The component that automatically turns the pump on is called as the float activator or in some models, the pressure sensor. The float activator works like the float that you have in your toilet’s tank. There’s some sort of ball that’s afloat on the water. When the water rises, this ball moves the arm of the pump.

Why does the sump pump need a backup battery?


It is important that you sump pump has a backup battery so that it will still work in the event of a power outage. Make sure that the battery still works by testing the device. Unplug the sump pump from the electricity outlet. Fill the sump basin with a bucket of water and watch if the device will automatically turn on. If it does, then the battery is still in good condition!

We hope that you learned about the importance of basement sump pumps through our blog today. If you need help with your sump pump, just call the most reliable plumbing company in Kansas City KS. Plumbers 911 Kansas provides top-notch plumbing services in Kansas City KS including sump pump repair in Kansas City KS, Kansas City KS sewer inspection services, backflow prevention services in Kansas City KS, Kansas City KS leak detection services and many more! Call us at 816-326-8643 to schedule a service!

Learn about our amazing plumbing services in Kansas! Watch our video below.

Posted on:

What Is A Basement Sump Pump?

basement-sump-pumpDo you experience recurring flooding in your basement? Do you live in an area where the foundation of your home is below the water table? If your answer is yes to both questions, have you checked if you already have a sump pump installed in your property?

A Quick Introduction About Sump Pumps

 

The sump pump is a device that’s usually installed in basements, specifically at the lowest point. It is responsible for the removal of the water that has accrued in the sump basin. If your basement is below the water table level in your area, water accumulates in the sump when it rains hard, when snow melts or when there’s just presence of natural groundwater. The sump pump will send the water away from your property to a place where there are no water issues such as a dry well or a municipal storm drain.

How Do Sump Systems Work?

 

A sump system is comprised of four major components: the outlet drain, the pump, a sump tank and the ground water collection system. The water is collected by a drain rock and will then be transported to the sump tank afterward. The sump tank is also referred to as “crock”, “basin” or “sump pit”. It can be made of tile, concrete, clay, steel, polyethylene or fiberglass and varies in size. The standard size of a sump tank is 18 inches in terms of diameter and about 2 to 3 feet in terms of depth. The tank has a hole on both sides for the incoming drain tile and they have lids. Now when the tank gets filled up with water to a specific level, a switching device automatically activates the pump. The water will then be removed from the tank and disposed to the right place through a discharge pipe or through its base. Once the task is complete, the motor will stop running.

Two Kinds Of Pumps

 

There are two kinds of sump pumps. A submersible pump is hidden inside the sump tank while the pedestal type protrudes from the sump tank’s cover with the help of a column. Pumps are powered by current and some also have back-up batteries that make the device run in case of a power outage.

Valuable Tips You Should Know

 

1. A submersible pump is preferred over a pedestal pump is there’s enough space in the sump basin in the first place. Submersible pumps allow homeowners to have the sump pit covered with a heavy-duty lid that tones down the noise as well as prevents objects and other substances or debris from getting into the pit. The cover also contributes in keeping the moist air from escaping the device and being released into your basement.

2. Sump pumps also clog. To prevent this plumbing problem, the pump should feature a no-screen design and a impellor that is capable of handling solids that are about half an inch in diameter.

3. When choosing a pump based on material, it is better to pick out one that’s made from cast iron core than one that’s made from plastic. The iron material contributes in dispersing heat to the water, thus helping in the longevity of the pump.

4. Switches can be mechanical or pressure-based but it’s better to choose the former. The float of the sump pump should be solid to avoid switch failure and pump burnout.

We hope that you enjoyed reading our blog post about basement sump pumps. If you need one installed for your home, just call the most reliable plumbing company in Avenue MD. Plumbers 911 Washington DC provides reputable plumbing services in Avenue MD including hydrojetting, mainline video inspection, backflow prevention service, drain cleaning, leak detection and many more!  Call us now at (877) 932-5325 to schedule a service!

Learn more about sump pumps by watching this cool video from This Old House!

Posted on: August 4, 2015

Sump Pump Maintenance Tips For The Homeowner

sump-pump-maintenanceAccording to research, over 60 percent of homes in the United States have issues with wet basements. This is a common problem for homes or properties that are located in areas where the water level is higher than the ground level. If you are also putting up with this kind of predicament, it is only wise that you have a sump pump installed. This device basically pumps the water out of your property and into a safe place where it will no longer cause problems such as a dry well or your area’s storm drain. Now you have to remember that just like any other device or appliance, the sump pump also needs to be properly maintained. Here are some tips you should consider!

1. Always check the inlet screen and make sure that debris and residues are not clogging it. For best results, do this task three to four times annually.

2. Always inspect the sump pit and get rid of any visible stone, mud or debris that can cause clogs in the machine.

3. Another important thing that you should do is to go outside your home and check that the water being pumped by the sump pump is actually going where it’s supposed to.

4. The sump pump has a component that’s referred to as the float. Guarantee that it’s operating smoothly and without any obstruction.

5. During winter months when the temperature is cold, check the sump pump’s discharge tube or line. It should never stop or freeze. Also inspect the vent line that’s hooked to it. If the vent hole is clogged, eradicate the obstruction.

6. Lastly, you can perform a little test to check on the pump’s efficiency. Get a bucket of water and slowly pour it into the pit. Observe what will happen to the float. If it’s working properly, it should rise with the water and trigger the machine to pump. If it won’t do anything at all, check if the device is plugged in. If it is plugged to a power source and still doesn’t operate, either the check valve or the float switch may be damaged.

We hope that you learned valuable tips about sump pump maintenance through our blog today. If you need your sump pump checked, just call the most reliable Norwell plumbing company. Plumbers 911 Boston provides emergency plumbing services in Norwell MA including drain cleaning, hydro-jetting, leak detection, camera sewer inspection, backflow prevention and many more! Call us at (877) 754-2139 to schedule a service!

Learn all about our reliable emergency plumbing services in Boston! Watch our video below.

Posted on:

What Is A Sump Pump?

what-is-a-sump-pumpHas your basement ever flooded? Have you ever had consistently wet or moist crawlspaces? If your answer is yes to both questions, we want to know, do you even have a sump pump at home? Learn more about sump pumps and why they’re important to homes. Read our blog today!

A Quick Look At Figures

 

Did you know that according to research, over 60 percent of American homes tolerate wetness in their basements and other below-ground rooms because of the presence of ground water. The truth is, the water cannot be removed when you live in a low-lying area. You’ll have to deal with the dampness and hope that it won’t lead to many issues such as the growth of mold and mildew. When these things grow in the basement or in your crawlspaces, the health of your loved ones will be put at risk. Fortunately, technology has brought sump pumps for us to take advantage of.

What are sump pumps?

 

Sump pumps are common plumbing fixtures in properties that are built in areas with low elevation or those places where the melting of snow can eventually lead to flooding. These pumps are installed to prevent flooding in the basement and to keep crawlspaces dry and moist-free. They are placed in sump pits where they function by pumping water out of the hole and removing it from the property.

What are sumps?

 

Sumps are well-like structures that are usually found in basements of homes and properties. They collect excess ground water that usually results from rapid snow melting or a rain shower that has went on for hours. All this water can fill the pit and when it overflows, water will seep out and flood your basement. You know what will happen next. Your walls, floors and your belongings may get damaged. Even your water heater in the basement will be at risk of damage. Mildew and molds may soon grow because the basement is cold, wet and dark.

How do sump pumps work?

 

When the pit gets filled with water, sump pump will automatically turn on. It will move the water out of the sump and transport it away from the house or property through the pipes. To make sure that the liquid won’t flow back out, the pump is equipped with a functional check valve.

We hope that we have answered the question, “What is a sump pump?” If you need one installed or repaired, just call the most reliable Pleasant Hill plumbers. Plumbers 911 Missouri provides local plumbing services in Pleasant Hill MO including sump pump installation, septic tank installation, backflow prevention, sewer camera inspection, drain cleaning and many more! Call us at 816-326-8643 to schedule a service!

Learn all about our sump pump repair services! Watch our video below for more information!

Posted on: July 29, 2015