Category: Septic Tank Care

Top 7 Residential Plumbing Care Tips for Boston Homeowners

Boston plumbersMost people take their plumbing system in Boston for granted. It may work fine today, but the next day, something could go wrong. If not properly maintained and promptly fixed, leaks or broken taps can become worse overtime. 
 
The problem gets bigger when we don’t pay attention to things. Sure, it may seem like a small faucet or a few drops of water here and there. But the real concern is: How much water is it wasting? How much money is thrown away?
 
Plumbing problems, big or small need immediate attention. That’s a fact. As a homeowner, it is also important to know beforehand what to do in case of a plumbing emergency. 
 
Do you know where your home’s water shut-off valve is located? Do you know who to call for help? Do you have basic plumbing tools in case you have to make temporary repairs?
 
Let us help you tick one off your to-do list. When you need an emergency plumber in Boston, call us! We have the best technicians in the area, and you can be sure that our services are of high-quality and reasonably priced.
 
We’ve been recommended by hundreds of residents all throughout the Massachusetts, even in you search for Boston plumber in Yelp. Our professional contractors respect your time and property. From plumbing fixtures to heating maintenance, we’ve got you covered.
 
First, let’s talk about garbage disposals.
 
There is no denying how useful it can be in a kitchen. While it is not completely necessary, this kitchen appliance simply makes cooking and cleaning up less of a hassle.
 
Unfortunately, despite how often the garbage disposal is used, it is one aspect of a kitchen that is often overlooked and dismissed. A broken disposal unit can cause a block in the drainage system which needless to say can be a costly affair.

#1 – What NOT To Put In Your Garbage Disposal

Below are just three tips to maintain and keep a garbage disposal system in tip-top shape.

1. Run the garbage disposal unit regularly. It is important to regularly use the garbage disposal unit. Turning on the system a few times a day can assure that rust does not build up along the blades of the system. Moreover, running the unit regularly prevents waste from accumulating and building up.

jammed garbage disposal in Boston2. Refrain from putting non-biodegradable food into the garbage disposal unit. It is understandable how tempting it is to shove all kinds of garbage into a garbage disposal unit. Not only does it save time, but tossing trash into the unit requires no trash bags and damp paper towels. Unfortunately, a typical garbage disposal system is simply not made to handle non-food materials. Grinding up glass materials, plastic bottles, scrap paper, cigarette butts and grease can cause damage to the garbage disposal unit’s blade and motor.

3. Keep the garbage disposal unit clean. Quite possibly the simplest way to keep a garbage disposal system from breaking down is to clean it every after use if possible. Running the garbage disposal system after pouring a few drops of soap through cold water is a sure-fire way to maintain a perfectly running garbage disposal system.

We can connect you with a 24 hour plumber in MA to work on your plumbing appliances. Check out our service areas, select your city and call us to schedule a service.

Let’s move on to #2, another part of your home that’s mostly taken for granted.. the septic tank!

Your septic tank is the perfect breeding ground for all types of pathogens and knowledge about its problems will enable you to prevent them from adversely affecting your family.

#2 – How Can I Tell if My Septic Tank is Still OK?

  • Soakaway problem. You will know if you have a soakaway septic tank problem when: you empty the sink but the water backs up to the bathtub or the shower your toilet keeps on overflowing there is a stinky smell coming from the drain pipes flushing the toilet becomes too slow there are foul smells and the presence of wet waste in your surroundings.
  • Strange sounds. Noises coming from the sink such as gurgling sounds indicate there is a problem in the system. It could mean a blocked or clogged drain field, or it could be the result of an intermittent increase in the water volume passing through the pipes.
  • Slow draining. A septic tank that takes too long to drain indicates a problem in the system. This can be caused by solid waste entering the tank’s drain field. When solid waste travels fast and does not have sufficient time to break down, it will clog the pipes and compromise the draining capability of the system.
  • Leaking pipes. Septic tank leaks are often unnoticed until the problem becomes too big. But you can observe its symptoms – green grass near the pipes which is greener than the surrounding grass and which grows faster. It could mean they are being ‘fertilized’ by the substance leaking from the pipe.

Aside from your septic system, keep an eye on for #3 —  your sump pumps!

Your sump pump is as important to your home as a fire extinguisher or a first-aid box. Although hardly ever used, it can be a major life-saver when the situation calls for it. Like all other emergency equipment, a sump pump should be well-maintained and mechanically fit.

#3 – What are the Common Problems in Sump Pumps?

Poor maintenance. A sump pump’s condition should be checked quarterly. Otherwise, you will be put through a great ordeal.

A faulty switch is one of the simplest yet equally annoying mechanical issues with sump pumps. To be safe, clean, adjust, and test your unit on a regular basis to check for problems.

A discharge pipe that is blocked or frozen over will result in a damaging backflow when left unrepaired. A grate will prevent clogs. However, since preventing pipes from freezing has never been realistic, it would be better to install an alternate emergency discharge line as back-up.

Installation fails. The absence of a check valve on the discharge pipe, which can result in water backflow. This will have a domino effect of causing your impeller to have a backward rotation that, in turn, loosens the motor shaft. Your unit may seem to function when it really doesn’t.

Failure to drill an air pressure-relief hole in the discharge pipe, specifically in the middle of the check valve and the pump. The absence of this hole results in the overwhelming build-up of air pressure, which forces your unit to exert itself more than it should. This places a toll on its performance and shortens its lifespan.

Old age. In general, a sump pump has a lifespan of seven to ten years. If your unit is nearing its end, symptoms of old age will start appearing. Once they do, make sure to have it assessed by one of our Boston professionals to see if an immediate replacement is necessary.

Loss of power. Really bad storms and lightning usually results in power outages, rendering your sump pump ineffective. To spare your basement from flooding, purchase and install a backup generator to keep your sump pump up and running as needed.

These two plumbing systems are mostly taken for granted because they’re not seen often, so ensure that you get them regularly checked by calling us today! Ditch the thought of calling a Boston budget plumbing company. We have local Boston plumbers that have over 10,000 hours of training and experience — we already know all plumbing problems and solutions!

Now, let’s talk about something that we use on almost a daily basis, #4: the water heater.

Let’s say you just got a new water heater installed…

You decide to jump in quickly to try it, but to your dismay the water is frigid cold. What might be the problem?

Before you snatch up that phone for a refund, you first need to know that these are common problems and they can be fixed.

#4 – Why Isn’t My Water Heater Working?

Here are some common problems you might encounter with your water heater.

Water is cold
If your water heater runs by electricity, and it is not bringing you hot water after being turned on for some time, the problem may be with the water heating component. Try to check if this is the problem and replace it with a new one.

Another problem may be the thermostat, which is the monitoring device. Water that’s too hot or too cold can be the result of this problem.

Boston Water Heater Installation ServicesLeaking water
This is a common problem for water heaters, when water leaks either from the tip or from the bottom of the appliance. Leaks can be caused by a number of various problems like corrosion.

When water sits in the tubes for long periods, sediment and rust builds up. Eventually, these elements create cracks inside the tubes and the tank itself.

There’s not enough water
Another big problem you might encounter is there is not enough water. When this happens, it’s usually the thermostat that has a problem. Check if the device is properly working and consider the actual temperature of the water to what you can see on the gauge.

A clogged vent can also be the cause of the problem. It may change the normal flow of water from the tubing.

Rusty water
Rusty colored water is usually the cause of a dissolved anode rod. An anode rod is the component of the heater that attracts corrosive elements in the water.

If it is defective, it often emits a sulphuric smell caused by rusting and degradation of the metal. If this is the problem, it might be time to change the anode of the water heater.

Eerie and popping noises
When there is an eerie sound emitting from the water heater, it usually is caused by buildup of sediments inside the tank. Remove the sediments by flushing them out and filling the tank with new clean water.

How Will I Know if My Water Heater Needs Replacement?

  • Listen to clanking or banging noises, which are signs of aging. Typically upon purchase, a residential water heater comes with a five to ten-year warranty. Unless you have made use of it sparingly over the years, it is advisable that you have your water heater replaced after the specified warranty period.
  • Check for leaks. Beware! A water heater tank that leaks is a potentially major headache. Calling us ASAP for assessment will save your walls, flooring, furniture, and the water heater unit itself. Depending on where the leak is coming from, a professional can assist you in determining whether your unit requires minor repairs or replacement.
  • Check if the water produced is hot enough or not. If the heating element and thermostat are not the culprits behind the heating failure, then call our licensed Boston experts to troubleshoot your unit. Expert advice is sounder than speculation.If your unit fails to heat water altogether, it’s an indication of repair or replacement, which our skilled and experienced technicians can make an informed decision on. Consider your hot water usage. Relative to your unit’s age, usage is a big factor in its performance. Even when still far from the end of its warranty period, your unit may suffer from premature aging due to the following:
  • You have a big or growing family. Your area of residence provides only hard water, which results in a buildup of minerals within the tank. This results in a plumbing line obstruction that inhibits your unit’s performance and decreases its life span. If your unit has served its maximum performance to your family in terms of usage, then perhaps it’s high time to let it retire and find a replacement.

Now for the good stuff: DIY Plumbing with #5 –Your toilet!

If you’re in a situation where the water in your toilet just won’t go down. It might be a headache to watch those things float in the water. But do not worry; here are some DIYs for a clogged toilet.

#5- How Do I Unclog My Toilet?

running toilet problem BostonDIY Method #1. The Plunger
Most clogged toilets just need one special tool – the plunger. A good plunger would have an extension flange on the rubber bell-shaped end. It is created to fit toilets better so you can convey more potency to the plunge.

A poor flush means that your toilet drain is completely plugged and does not drain. A slow drain means that flushed water somewhat fills the bowl but does not clean the waste away. The water level remains high, but normally drains after a couple of minutes.

DIY Method #2. Drain Snake
A drain snake is a long wire coil with a corkscrew-like tip that you lodge into the pipe until it comes into contact with the clog. You then turn the snake clockwise so the head of the wire screws through the clog and disjoints it. Or the rubble winds onto the wire so you can dislodge the clog.

DIY Method #3. Vacuum
You can use a wet and dry vacuum to dislodge anything that is causing the clog. You can also use the vacuum to empty water out of the bowl. Put a piece of cloth or an old towel down to seal around the drain.

Turning on the vacuum and trying to suction the clog can be effective for anything hard that was dropped in the toilet bowl.

DIY Method #4. Dishwashing Liquid and Hot Water
You can squirt a small amount of dishwashing liquid in the bowl, and then pour a pot of hot water in the bowl. Let the mixture sit for a couple of minutes before attempting to flush.

The dishwashing liquid will ease out the waste clogging the drain and hot water will soften the clogged matter. This will make it easy for you to flush the toilet once everything settles in.

DIY Method #5. Baking Soda and Vinegar
Baking soda and vinegar can be effective in dislodging anything that clogs a toilet. A cup of baking soda, a cup of white vinegar, and a kettle of hot water poured into the bowl will work instantly to flush the toilet clean.

Then, #6 — Your drains..

If you’ve been standing there waiting for the drain to flush the water out but it’s taking far too long.

This is an initial sign that the toilet or sink could be facing a clogged drain. Basically, if you are cautious of what goes down on your drains, you really shouldn’t clean and clear them of debris recurrently.

The following maintenance is needed to prevent a clogged drain that can be a problem in the future. Some can be done once a week and some about once a month.

#6- How Do You Keep Drains Clog Free?

Once a week maintenance tips:
Bring the pop-up stoppers up in the bathroom sink to get rid of trapped debris, put in in the trash and wash the stopper and put it back in the drain.

Take out the drain cover from the shower of the bathtub drain and use a bent wire or hair catching brush to remove debris that might have collected there.

Drain Cleaning BostonOnce a month maintenance tips:
Clean and clear your waste disposal with a stiff disposer brush or mix a few cups of ice and table salt. This will help remove grease buildup and slime off the sides of the disposer. Flush it with cold water added with lemon to deodorize.

For bathtub maintenance, pull out the overflow plate, and bring the pop-up handle up to grasp the rocker arm. Get rid of accumulated debris and wash thoroughly before setting it back.

It is also advisable to use a good cleaner to protect all the drains in your home. A good cleaner has to be non-corrosive and biodegradable so it won’t deteriorate your home plumbing system. It is better to use a nature friendly cleaner than chemical ones as it can be safe to your plumbing system and your family. Drain cleaning in Boston is one of our expertise, call us for help!

To clean your drains effectively, you can use baking soda and vinegar. This is a great way to help eliminate a slow-moving drain.

To unclog a drain with baking soda and vinegar, use the following tips

1. Let a pot of boiling water run down through the drain.
2. Throw in about half a cup of baking soda. Let it sit for a couple of minutes.
3. Then, pour in a mixture of a cup of vinegar and a cup of hot water.
4. Cover the drain with the plug and let it sit for 5-10 mins.
5. Flush with boiling water.

Lastly and the most basic: Faucet installation.

#7 – How Do I Install a Faucet?

Step 1. Inspect the openings.
Probe the sink for openings and their distance together. Bathroom faucets, in particular, have two handles that may be connected to the spout to form a single unit, or they may be set up apart. This information will be helpful for proper faucet installation or replacement.

Step 2. Turn off the water supply.
There are generally two valves for water supply, one for hot water and another for cold. Turn them off by twisting the valves clockwise to stop water from running in the tubes.

Step 3. Put the faucet replacement in position.

For proper faucet installation:

– Start by positioning the gasket and the faucet on the sink.
– From beneath the sink, thread the mounting nuts into the shanks. Make sure that the flat, wide side part of the mounting nut is up.
– Screw the mounting nuts tight but not too tight to damage it or make it difficult for future replacements.

Step 4. Connect the water supply.
Water is typically supplied by the water-supply tubes. To connect it properly, make sure you take note of the following steps.
Cover the threads of the water supply valve with plumbers tape.
Thread the nut into the shut-off valve and secure with a wrench.
Wrap the faucet shanks threads with plumbers tape and thread the water supply nut against the faucet shanks.
Secure the nut with a wrench.

Step 5. Clean the faucet by flushing.
Make sure that the water supply is clean by running water into the faucet to flush trapped debris off of it. Trapped debris can impair the sealing surfaces inside the faucet and trigger leaks.
Open the water supply valves beneath the sink.
Let water run for 15 seconds to remove residues and trapped particles off the tube.

We’ve covered a whole lot of topics in this blog post, and we hope that you now which one will save you loads of dollars in the end?

However, the decision will always be up to you. Just remember to contact us for any of your plumbing repairs, big or small, because we have licensed, insured and certified Boston contractors on standby, 24/7.

Watch the video below to see why you need to eliminate sub-standard plumbing services and only hire reliable plumbing experts in Boston.

Posted on: October 18, 2018

Why Opt for Septic Tank Cleaning Service in Beaumont

plumber for septic tank cleaning service in Beaumont

Septic tank cleaning service in Beaumont is important to maintain a healthy plumbing system. Without this, the septic tank will cease to work properly. It will also damage the whole plumbing system. Among these are sewer backups, leakage, and the need for a total replacement. 11

Tips on How to Keep Septic Tank System Clean

  1. Septic Tank Pumping – Sludge gets collected over time inside your septic tank. This is the main cause of sewer backups. Take note that repairs can be very messy and costly. Opting for a professional septic tank cleaning service in Beaumont will help you avoid this problem. The usual practice is having septic tank pumping anytime between 2 to 5 years.  The more people at home means the more frequent the septic tank pumping should be done.
  2. Regular Plumbing Inspection – Having regular plumbing inspection done by a licensed Beaumont plumber is a wise decision. Only professional plumbing contractors will be able to identify and fix problems. They have a standard checklist that will have them going through every nook and cranny of your plumbing system.
  3. Maintenance of Plumbing System – Aside from septic tank cleaning, you can also do little things on your own to keep your plumbing system working flawlessly. For example, you can clean your drains with vinegar and baking soda. Then, pour hot water to flush residue that may cause blockages in the future. Another good practice is to avoid flushing objects down the drain like tissue paper, diaper, and wet wipes. Teach also the kids to not flush toys down the toilet. Lastly, never ever pour oil and grease down the drain.
  4. Maintenance of the Septic Drain Field – Ensure that there are no trees growing on or near the septic drain field to prevent the possibility of roots from piercing the pipes. Also, do not put heavy items in the area of the septic tank to avoid having the soil become compact. Finally, do not direct water drainage systems into the drain field. These are the roof drains, floor drains, and other water drainage channels. This will prevent flood water from accumulating in the drain field.

Contact Plumbers 911 for Septic Tank Cleaning Service in Beaumont

Maintaining the septic tank system is the responsibility of every homeowner. By maintaining the system, the life of the plumbing system will be extended and it will reduce the number of times you will have to call a licensed Beaumont plumber to make a repair.

If ever you are experiencing septic tank problems as you read this, do not fret. Plumbers 911 is there to help you. With a wide database of professional plumbers in your area, you can be sure that a local Beaumont plumber will be at your doorstep in no time. Call (409) 237-3137 today to ask for a free quote or to schedule an appointment.

 

Posted on: September 11, 2017

Septic Tank Cleaning in Aurora – Your Answer to Maintaining an Effective Drainage System

Septic tanks are commonly built in homes that have no direct access to the municipal drainage system. Without the drainage system, bacteria and germs from waste matter coming out of the sewage pipes will not be controlled. The septic tank does this in place of the septic tank. However, septic tanks fill up over time. This result to clogging and pipe blockage. Thus, septic tank cleaning in Aurora is important to maintain the effectiveness of your home’s drainage system.

full septic tank cleaning in Aurora

How a Septic Tank Works

Septic tanks can be made of cement or plastic. Pipes connect the home’s drainage system to the septic tank. All the wastewater coming from the drains of your home will end up in the septic tank. The wastes undergo separation and results into these three major layers:

  • Sludge – Thick layer of heavy solid waste materials that that settles at the bottom of the tank.
  • Effluent – Lighter waste materials that settle above the sludge.
  • Scum – The lightest waste materials will form this thin layer. Usually, these are oil and grease.

The Importance of Septic Tank Cleaning

Homeowners should be aware of the importance of septic tank cleaning in Aurora to maintain it in tip-top shape. Septic tank cleaning done every 3 to 5 years makes your septic tank healthy. The size of the tank and the number of people living in the house affects the frequency of pumping and cleaning. Septic pumping is part of the cleaning process as it removes the heavy layer of sludge from the tank.

Without regular septic tank cleaning, you will experience clogging in the leach field or drain field. Blocked drain pipes result in clogging of the toilet, sinks, and drains. A nasty sewage-like smell comes out of the drains, as well. It will really be inconvenient for you as a homeowner.

Find a licensed Aurora plumber who offers septic tank cleaning immediately if you haven’t ever availed the service for your property. Do not attempt to do it yourself. The task requires special equipment and skill. Moreover, you will be exposing yourself and your family to harmful germs and bacteria coming from the waste matter. Do not worry about the cost of service. You might end up spending more on plumbing fixture repair if you skip this routine task.

Call Plumbers 911 for Septic Tank Cleaning in Aurora

Plumbers 911 has a wide database of local Aurora plumbers. You can be sure that we can refer a licensed Aurora plumber that can inspect and clean your septic tank. All you have to do is call (855) 484-3911 to inquire for a free quote or to schedule a visit.

 

Posted on: September 7, 2017

Thing to Remember on Septic Pumping in Chicago

septic pumping in Chicago service

Having a healthy septic system is important for both residential and commercial properties. Regular maintenance ensures that your septic system will work smoothly and that you will not encounter problems in the near future. Read on to know more about septic pumping in Chicago.

Your Septic System

The septic system is an important part of your property. It is in-charge of bringing waste water from your drains to the septic tank. From there, waste water is separated into solid, liquid, and foam. Then, bacteria will break down the solids into liquid over time. Once in clear liquid form, it is then slowly released to and absorbed by the soil. Professional septic pumping is needed to maintain the healthy state of your septic system.

Be Alarmed When These Happen

  • Slow or clogged drains – Clogged drains are often caused by an obstruction inside the pipes. However, if there is no obstruction and the clog still persists, it is most likely that the septic tank is full. Also, observe if there is a gurgling sound or if the drains overflow when you flush a toilet or use the kitchen sink. These also happen when the septic tank is full.
  • Nasty smell coming from the drains – Drain have a trap (U-shaped pipe) that collects water to block odors from coming out of the drain. When a septic tank is full, wastewater fails to pass easily through the pipes and into the tank. Thus the nasty smell.
  • Wet spot or having a pool of water in the lawn – The septic tank is usually covered with grass. When the septic tank is full, wastewater overflows and seep through the soil. You may also notice that the grass in this part of the lawn is greener and thicker compared to other parts because it is often wet

Call a Professional for Effective Septic Pumping in Chicago

Any plumbing task required for septic tanks should only be done by licensed Chicago plumbers. This is because septic tanks deal with wastes. Not only are we concerned of foul odors here but also bacteria that might pose health problems to your house or staff members. 

Septic pumping is one of the ways to keep your septic tank working efficiently. Professional plumbers advise having your septic tank pumped once every 5 years and more often than that if the tank is big or if there are many people using toilets and showers such as those in business establishments. Meanwhile, some states and cities have a set schedule as to when properties need to undergo septic pumping. Nevertheless, your professional plumber would know this.

Hire a licensed Chicago plumber from Plumbers 911 for your septic pumping needs. Just call (855) – 484-3911 to schedule an appointment.

 

Posted on: August 1, 2017

Answers To Top 5 Questions About Septic Tanks and Septic Tank Cleaning in Miami

Miami septic tank cleaning

Here’s a fact: twenty-five percent of all homes in America have septic tanks. Properties that are not tapped to the municipal sewer line has to have septic tanks installed a few meters away from the property. The septic tank will be the place where all solid and liquid wastes will go. We have compiled answers to top 5 questions on septic tanks and septic tank cleaning in Miami. Through this, we hope that you will be able to know the basics about septic tanks and septic tank cleaning.

How do septic tank systems work?

Septic tank systems are basically made of the septic tank itself. It is in this tank that wastes from the property go. The septic tank digests and separates the liquid from the solid waste matter. So-called leaching chambers will then slowly release the effluent into the soil or surface water.

Other septic tank systems have pumps that automatically trickle effluent into through sand or into man-made wetlands. Meanwhile, other septic tank systems are more sophisticated and can evaporate or disinfect wastewater before it is spilled back to the soil or surface water.

Why do septic tank systems fail?

Septic tanks systems fail because of bad design and failure to do routine maintenance. Some septic tanks are installed in places where there is little soil or surface water. Meanwhile, septic tank pumping should be done every 3 to 5 years and more frequently for smaller septic tanks. Pumping ensures that solid waste matter does not build up in the system and cause clogging. Pumping also includes septic tank cleaning and checking for cracks and leaks.

I have a septic tank installed. Is my family at risk for health and water quality problems?

There is no need to worry if you know that your septic tank system has been properly designed, installed, and maintained. Septic tank systems that may contaminate surface and ground water if not installed properly. It can also excessively release nitrogen to coastal waters which will cause the increase of algae in the water.

Can I clean and pump my own septic tank? 

Septic tank pumping and cleaning should always be left to the professionals. Only plumbing experts have the right tools and know-how in pumping and cleaning your septic tank. Septic tank pumping will require a vacuum-powered septic pump truck that only plumbing companies have. Also, you avoid the nasty smell and risk of getting a life-threatening disease if you hire the pros to do the dirty job for you.

Who should I call for my septic tank cleaning and pumping needs?

Plumbers 911 Florida can connect you with the most reliable local Miami plumbers. All you have to do is call (305) 699-3368 to schedule a visit right away.

 

Posted on: July 13, 2017