Category: Plumbing Appliances

Read This To Never Worry About A Broken Washing Machine Ever Again

Washing machines have undoubtedly made washing clothes convenient. Housewives no longer have to waste time and effort in washing clothes by hand just like the old days. Moreover, even young kids can wash dirty clothes because of the features made available by modern washing machines. But calling a plumbing contractor in Boston, MA can’t be avoided when your washing machine malfunctions. So as a treat, we have listed a few common washing machine problems that you can expect. We also included the solutions that you can do to fix them before you call a plumber in Boston.

Common Washing Machine Problems and Fixes

Vibrating washing machine

Oftentimes, a washing machine vibrates when it is standing on an unstable floor or when the laundry loaded inside it is unbalanced.

The first thing to do is to open the washer bin to rearrange the load of laundry. Make sure not overload the washing machine and to follow only the recommended load stated in its manual. Clothes need room to move freely for efficient washing.

Then, check underneath the unit to see if the floor is unleveled. Having a residential plumbing expert come over annually for your plumbing maintenance check will also reveal these kinds of problems.

residential plumbing expert for washing machine
Broken washing machine? Call (877)-751-2934 today! 

Leaking Washing Machine

A washing machine can leak because of the following scenarios:

  • Laundry not loaded properly
  • Water hoses not attached or inserted properly
  • Old water hoses
  • Clogged drains

You can do most of the fixes for this problem on your own. If the problem is uncomplicated, you might not need help from a plumbing contractor in Boston, MA anymore. But, for example, you have tried all means to unclog the drain in your laundry area and nothing works, you will have to call an emergency plumber in Boston. He will have the complete tools to check the insides of the drain and even up to the sewers to see what the real cause of the problem is.

Making strange noises

One common cause of this is when something gets caught in the washer drain or in between the gaps like buttons or coins. Check the insides of your washing machine to remove this.

Gurgling sounds indicate clogging in the washing machine’s drain. Remove the drain line to check what causes the clog and remove it if you can.

Lastly, buzzing or humming noises are most likely caused by a jammed pump. If the pump is thoroughly damaged, call a licensed Boston plumber to replace it.

Let Us Connect You with a Plumbing Contractor in Boston,  MA

Plumbers 911 Boston is one of the top residential plumbing companies in Boston and in other states in the US. We maintain an extensive database of emergency plumbers in Boston. Therefore, you can be sure to expect one in your doorstep the moment you call.

plumbers 911 discount coupon
Schedule a visit today by calling (877)-751-2934.  But before you go, make sure that you check out our coupon page to get $35 off on your initial service call!  

Posted on: September 18, 2018

Plumber in Coconut Creek Shares Tips for Home Appliance Installation

kitchen appliance plumber in coconut creekBuying a new home appliance is easy but it’s not the same case when it comes to installation. Each year, home appliances get more sophisticated than ever that installation gets a bit tricky. If you have tried installing a home appliance on your own in the past, you may encounter difficulties. A reliable plumber in Coconut Creek shares valuable tips for home appliance installation in this article which can help you. Take note, however, that it is still recommended that you allow a plumbing professional or an appliance repair technician to install your new appliance to prevent mistakes and keep your unit’s warranty.

Dishwasher

Dishwashers commonly have 3 connections:

  1. Electric cable
  2. Drain line
  3. Clean water line

There are, however, newer models of dishwashing units that have a 4th connection – the aerator. It is important that you make sure you have connections ready depending on the model of your unit. Also, be careful not to overload the power circuit. Do not make any changes or adjustments with your installation while the power is switched on.

Refrigerator

Refrigeration installation is the easiest in the lot. You will not have to worry about any connection other than the power supply. However, there are guidelines to remember in installing your refrigerator. 

First, choose a favorable location. Do not place your refrigerator near the stove, oven, or any heat source. The machine of the refrigerator will overwork and try to make its insides cooler if it’s placed near a heat source. This means that it will conk out earlier and will also use a lot of electricity. 

If you are planning to install your refrigerator within a cabinet recess, make sure that it has at least half an inch allowance from the wall to allow air to circulate freely.

Oven, Stove, and Gas Range

Electric ovens and stoves are easier to install compared to their gas-powered counterparts. All you need to consider is the location. Apart from making sure that they can be hooked up to a power source, you will also need to make sure that the area is well-ventilated for a more comfortable cooking experience. 

For gas ovens and ranges, it is highly recommended that you find a licensed Coconut Creek plumber to hook it up with your gas line. There is no room for error when it comes to gas lines. Rather than risk your family and your home’s safety, it would be better to leave it to the experts. 

Washer and Dryer

Similar to the dishwasher, washer and dryer installations require connections to power and water supplies so location is very important. The ground should also be leveled to prevent the washer and dryer from wiggling while in use. Lastly, the dryer’s vent should be properly installed. 

Choose to Hire the Pros

Plumbers 911 can quickly refer you to the most experienced plumbers in your locality. The professionals have the right equipment and know-how in home appliance installation so you need not worry if everything is done right. All you have to do is call (954) 866-7699 to ask for a free quote and to schedule an appointment.

 

Posted on: August 3, 2017

Handy Tips on Garbage Disposal Repair in Chicago

Over the years, garbage disposal units have become an indispensable kitchen appliance. The garbage disposal has an important role to play in that it liquefies and shreds food wastes, therefore skipping the part of throwing them into the trash bin. It also saves you the hassle of throwing your rotten food into the dumpster. Thus, it’s a major concern when a garbage disposal unit acts up. Read on and get to know some tips on garbage disposal repair in Chicago.

Garbage Disposal Maintenance and Care

Taking good care of the garbage disposal will save you a lot of pricey plumbing repairs. A garbage disposal that is properly cared for can function up to 10 years. To have your garbage disposal working properly you can regularly pour a mixture of baking soda and white vinegar. This is natural mixture is cheap and readily available in your kitchen. When regularly done, it will make your garbage disposal’s razors sharp as ever. Meanwhile, to remove built-up grease and other sediments, mix a gallon of water with a teaspoon of bleach and pour into the disposal. After ten minutes, pour cold water down the drain to rinse.

Garbage Disposal Repair

First, you must always remember that whatever happens, NEVER put your hand inside the garbage disposal. When something is stuck inside the garbage disposal, what you can primarily do is to try pressing the reset button. Try to run it again afterward. If it is still jammed, you will have to inspect the insides to see what’s causing the jam. To be on the safe side, unplug the disposal first. Use a flashlight to see whatever is jammed inside the garbage disposal. Once you see it, use a long pair of plier to remove the object.  When the object is removed, plug the garbage disposal in and try if it’s already working. If not, it’s time to ask the help of the pros.

Call a Chicago Professional for Help

Do not try other methods of repair other than what is shared in this article. Otherwise, you might just end up spending more on repairs or worse, having to buy a brand new garbage disposal unit! If all else fails, call a licensed Chicago plumber from Plumbers 911 Illinois to help you. Call (855)484-3911 today to schedule a visit.

 

Posted on: July 19, 2017

FIX LEAKY GARBAGE DISPOSAL IN YOUR CHICAGO IL HOME

leaky garbage disposal chicagoNo matter how much care you give onto your garbage disposal, it will encounter issues sooner or later. Hard materials could get into its blades, or worse, leaks can develop over time.

The first step is to investigate the situation. It is necessary to know what causes the leak and your repair options. This will give you an idea on where the source is and if you can do the job or call a professional Chicago plumber.

Where the Common Leaks Are

  • The garbage disposal itself
  • Leak in the dishwasher connection
  • Sink flange
  • The drain pipe

The first step is to identify the source of the leak. Start by turning your garbage disposal off. DO NOT start fixing a working garbage disposal. Begin the process by drying the external part of the disposal including the sink flange. This process will ensure that the moisture will stand out. Put a stopper in the sink drain before filling the sink with water.

Once done, wait for several minutes and observe the garbage disposal under your sink. The leak is coming from the sink flange if you notice active dripping underneath.

However, if it is dry, it is now time to remove the drain plug from the sink. This will give you a view on the three other points: the dishwasher hose, the drain pipe, or some other part of the garbage disposal. How to fix this depends on where the dripping is starting.

To DIY or Not

If you’re the type of person who’s comfortable in plumbing tasks, then you might be able to fix this yourself. However, if you have the slightest doubt on the plumbing thing, consider calling the services of a licensed Chicago contractor.

The leaky sink flange itself is easy to fix. All you need to do is tighten the bolts holding the flange onto the sink drain. However, if this won’t work, you might need to apply a new layer of plumbers putty in the flange to seal it.

Loosen up the mounting bolts to create space between the drain and the flange to smear a dab of putty around the drain. To close this, re-tighten the bolts and patiently wait a few hours for the putty to set and form a tight seal.

If you think that the dishwasher hose is leaky, determine first if it is simply loose or really cracked. You will be needing to replace if it is cracked but a loose one can easily be fixed just by tightening it.

If your drain line is leaky, you can fix this by using a wrench to tighten the connection. You may also check the seal inside this as they may have failed due to wear and tear.

The worst thing that could happen if the leak is coming from a crack in the garbage disposal itself. This may result to replacement of the entire disposal.

If you think that this is the case, just reach out to your local Chicago plumbing experts for reliable expert service.

Posted on: May 28, 2017

When it the Best Time to Go Tankless in Independence?

water heater installation independenceNowadays, most homes in Independence, Missouri have conventional water heaters. This plumbing appliance stores gallons of hot water always ready when you need it. If you are from the place, it is worth noting that there is another type of water heater — the tankless. This type heats water directly as needed.

The tankless water heater has a lot of benefits, but bear in mind that this is not always the perfect one for every situation or home. If you are planning to change your water heater, then read on so you will learn more about tankless water heaters and see if it is the perfect one for you.

Tankless Water Heater Pros

The main advantage of tankless water heaters versus traditionals ones is that they are generally more efficient. The energy guide stickers of the two can give comparison and it can help you see the estimated energy consumption difference immediately.

Tankless water heaters have various models and each has its own energy-saving feature. This is primarily because this type of heater save energy by not storing water. Conventional water heaters on the other hand constantly cools water requiring frequent re-heating. The tankless water heater uses no energy when the hot water is not being use. This energy savings make a huge difference in your monthly electric and water bills.

Here are more benefits of tankless water heaters:

  • Size – Tankless water heaters are compact, just about the size of a briefcase giving you more options in terms of installation location and giving you more storage space.
  • Lifespan – This type of water heater lives longer with proper maintenance and known to last for about 20 years.
  • Home Value – Tankless water heaters adds value to your home when you sell it. Because it gives the next owner more savings potential in terms of utilities.

Tankless Water Heater Cons

It is true that tankless water heaters will indeed save you lots of money in the long run, however the upfront cost is greatly higher compared to conventional water heaters. And it’s just one of the things to consider! There is another one: The installation costs so much more as well! You cannot install a tankless water heater yourself.

If you are ever considering updating your water heaters and upgrading to tankless, get a full and accurate quote from your reliable Independence plumbing expert to ensure that your projected savings justify the higher upfront price tag.

Conventional water heaters and tankless ones should be chosen depending on the size of the household that will use them. In this case, conventional modes outspace the tankless ones in terms of water output. In large households, conventional water heaters are still best because this type gets you through rush hours better.

Both models have similarity: it always takes a few seconds for the hot water to reach the faucet and it is much longer with tankless water heaters. This all depends on how far is the water heater to the faucet.

If you think that the tankless water heater is still the best option for you, then call Plumbers 911 Independence immediately for assistance.

Posted on: