Category: Kitchen Plumbing

How to replace a kitchen mixer tap in your Chicago Home

Kinsey new kitchen tap installAre you having problems with your kitchen mixer tap in your Chicago home? It could be leaking or the taps could be showing up other issues. In case you are planning to revamp your kitchen, you would definitely want to replace them. Almost all modern kitchens have mixer taps which deliver both hot and cold water through one single pipe.

The water flowing out is very comfortable to use in the cold season. Every tap comes with a thread of half-inch at the bottom and a small size washer that goes to the bottom of the sink and is fitted with a tiny nut. Majority mixer taps have foam plate which is placed just beneath the unit and this seals the tap very well.

You can connect tap pipes using different methods and the flexible type is really good, the one that has a little rubber seal on it. It’s very simple and easy to fit because the pipes need not be entirely lined up. You can also opt for a rigid tap connector about half an inch but it has a small collar with a rubber washer or a fiber washer.

How to remove the old kitchen tap

First you need to remove the part of the tap that is present down under the sink so that the pipe connectors are visible and access them at ease. So here are the steps:

  • Cut off the water supply and the water supply should be turned off –This is pretty simple so find out the shut-off valve and turn off the water supply. Turn on the taps and check whether the water supply is off.
  • Take off the old tap – If you are not an expert you can call our skilled technicians in Chicago to do so. We have specialized tools for disconnecting taps like claws and tube spanners that help to disconnect swiftly.
  • Disconnecting tap from the main –You have to disconnect the tap from the main connection and it can be done simply by unscrewing.
  • Remove the debris –Clean off any debris that is stuck to the old tap.

Fitting the new mixer tapkitchen sink plumbing

It is easy to fit a new mixer tap, you need to make sure that you have installed it correctly and the seals are just right so that there are no leaks. It is better to call our experienced plumber if you want the best fitting.

Here are the steps:

Fitting the mixer tap on the upper side of the sink –  Firstly, scrub the sink area well to clear off the debris that had accumulated while the old tap was fitted. It’s not a difficult task as you need to slot the pipes in the sink through the holes and the rest of it you need to fix from under the sink.

Connect the tap right under the sink – Take the plastic nut and the rubber washer, get under the sink with these. Use a tool to tighten the tap and make sure the tap does not wobble as you start using it.

Connect the tap to water pipes – Connect the water pipes once again but do not forget to replace the o-rings and washers. The seal is of utmost importance make sure its water tight seal. You might use a tape as well.

Turn on water flow – Now turn on the new tap and see water flowing well. Please check for leaks beneath under the sink and tidy up the place.

It is relatively easy to fit a new mixer tap by removing an old one. There are clients who wish to take a DIY initiative as they have the experience and the right set of tools. But you can always get in touch with our reputed plumbing network in Chicago for new fittings, repairs and replacement. Most of us don’t have time to do such things and this is why we are there to provide you assistance.

Posted on: July 23, 2018

How to Change a Kitchen Sink in Your Kansas City Home

Drain Cleaner syracuseA kitchen is a place where you and your family spend most of the time cooking, and preparing food is time consuming. Kitchen fittings are installed inside so that your space looks complete and useful. Sink is one such very essential fitting of the kitchen and it comes in different sizes and shapes. If you are planning to throw away your kitchen sink, installing a new one is a very tricky procedure. First of all consider whether the proportions of the new sink matches with the old one. If the new one is larger in size, you must ensure that your worktop is again recut to proper size so that it fits in seamlessly.

Taking off an old sink

The material used in constructing also determines the amount of labor or work involved. A stainless steel is lighter than a ceramic sink and you will need more helping hands while installing a heavy sink. It’s not recommended to settle for a low quality material because if you save money now, you might have to spend a lot of money in the long run. Read reviews before you purchase a new unit.

Installation

The difficulty in the level of installation also depends on the position of your cold and hot feed. If you are an expert, you might need specialist tools like a tube spanner. Incase you are not confident, it’s best to hire an installation expert in Kansas City. There are web of pipes under kitchen sinks and you will also find valves that help to navigate. And most of the time the nuts are hidden by the sink basin and this makes it tricky for you to reach to the nuts. This is when you would need an expert.

Taking off old kitchen sink:

A new unit in your kitchen could render more efficiency and also improve the layout. There are two very essential procedures you need to perform before you take off the old sink:

  1. Turn off the cold and hot water supply
  2. Disconnect the waste pipe.

Once these steps are done, it’s easy to remove the sink.

 Fitting a new sink

The first thing you need to do is cleaning the worktop sides and removing any old silicon or scum. It is primarily important to determine whether the hole is big for your new sink or not. kitchen sinkIf you find the hole smaller, turn the new sink in up-side down position and start drawing round the perimeter. This makes it easy for you to cut a new hole precisely. Once the hole is cut, mock up the sink that you are planning to fit prior to sealing, and this would ensure everything remains fine. There are different types of kitchen taps so you can fit the one you like. Sinks don’t come preconfigured with tap holes so you need to call a plumber to do that. It is always wise to call a professional plumber in Kansas City if you desire to fit a new ceramic sink in your kitchen. If you or any inexperienced person does it, there could be chances of the ceramic cracking and your sink would be ruined. After all these procedures are done, you can fit the sink in place.

The right fit

It is very important to get the fit of the sink very properly because you should not force the sink in the slot, neither it should be loose. It should fit just rightly and comfortably so that there won’t be any leaking issues. Incase of forcing a sink inside, the materials could get damaged and you would have to re-install. Measure the space available for the sink to fit so that there are no mistakes.

CONCLUSION

Buy an item that comes with warranty so that you can be confident about the quality and the after-sales service. Kitchen sinks are something you use everyday so durability is a top factor.

Posted on: May 23, 2018

Biggest Plumbing Myths One Should Be Aware Of

There are few plumbing myths that most homeowners believe and most of them are aware of the various plumbing issues. Usually homeowners consider plumbing as an emergency service and when not required its ‘out of sight and out of mind’. So here is taking a look at some of the expensive plumbing myths:

If the drains are all working, all are in good condition – Its good to know that just because the drains are working, it does not mean that everything is working fine. Sometimes there are food particles gathering right inside the discharge pipe and homeowners might not be aware. It’s best to look out for early signs, whether there is slow drainage or improper disposal unit.

A faucet leaking is not a big deal – Leaky faucets can not only cause hiking water bills but also lot of corrosion to the faucets and plumbing fixtures. If the leakage is continuous, it could lead to mold, rust and rotting. Nip the issue in the bud and don’t sit over a leaky faucet thinking everything is fine. If you don’t have experience, don’t try your hands on DIY but call a plumber for maintenance. Plumber putty is not a permanent solution at all that most people think.

A little water stain is a normal thing – A little water stain can be an indication of a huge problem. Its better not to ignore plumbing maintenance works because you never know when this small thing is going to turn out to be a big leak. Water has the ability to travel at length along horizontal surfaces and there might be a bigger leak hiding behind the stain. Anytime you see even a little stain, call a professional plumber.

Hard water does not harmHard water is a complete nuisance because it can result in mineral deposits on all plumbing fixtures and cause a scale to form over the pipes. Hard water contains magnesium and calcium carbonates that causes so much deposition.

Low water pressure is not much inconvenience – Do you know that water pressure problems cause leakage in pipes? Leaks are a real mess as it can travel below homes and cause damage to the foundation and infrastructure. Call a plumber if water starts trickling.

Toilets are a great place for garbage disposal – Please keep in mind that you should not flush anything down the toilet. Due to garbage disposal, your bathroom can be overflowing, you might have to call emergency plumbing and indulge in a lot of cleanups. Don’t dispose of items like thick skins, shells, tough pieces of meat or else you might need a plumber in Kansas anytime. Do not try using in-tank toilet cleaners as they have lots of bleach that actually damage the inner walls of the toilet, instead use in-bowl cleaners.

CONCLUSION :Brasher Falls plumbing fixing sink

Now that you know the myths, you might be thinking that you do not know about plumbing. Yes, exactly and this is why there are professionals to perform such specialized services. Each and every home cannot escape from plumbing in Kansas and when the issue is serious, the investment is a huge one and as such it’s best to call a plumber for maintenance. Believing in myths is a complete myth, live the reality and have a well-maintained property. All plumbers are not the same therefore get in touch with a reputed and experienced company that has a good record of client servicing and support. Call us for 24/7 emergency plumbing Kansas City : (816) 384-1295 today !

Posted on: April 13, 2018

Helpful Emergency Plumbing Solutions for Every Home

emergency plumbing solutions overland parkThe first step to becoming a responsible homeowner is having a good idea about basic plumbing tips. Plumbing is one thing where you might need emergency service anytime. Imagine if you discover a heavy leakage in your waterline early morning or a flooded bathroom late at night? There are plumbing companies in Overland Park that offer emergency solutions but it’s also good for you to know the basics. One an issue has already manifested, you can get in touch with a plumbing service to handle the situation.

 

What should you know about emergency plumbing?

An emergency plumbing is a bit different from routine checks and here are their specialities:

  • There are a few things that you cannot mend – Some plumbing problems require instant repairs. Some issues that are minor can be handled very easily but when things get out of control, you need an emergency service.
  • They offer a wide range of service – You must know when to call an emergency plumber in Overland Park. Some of the services they offer instantly at any hour include gas leakage, running toilets, burst pipes and sewage problems. Any problem that might cause harm to your health and damage your property is an emergency.
  • Get them anytime – Routine plumbers are not available at odd hours and you might discover a problem even a 3 am or on weekends. The day and the time of day do not matter; they will come to rescue you. Just give a call and they would arrive as soon as they can.
  • Definitely bit more expensive than routine services – You must not hesitate to pay something extra for premium service. A team of plumbers coming to rescue you at wee hours and mending all complicated issues deserves more payment.

Helpful emergency plumbing tips

  • A broken pipe or water leakage – It’s very important to take a note of all the shut-off valves that are responsible for managing the water supply. Do an inspection of your kitchen sink, water heaters, toilet papers, heating systems, tubs and other all other appliances. Ask the plumber working at your place about the stop valves. If needed, seek information from a professional, this will boost your confidence.
  • Repairing broken pipe yourself – Your pipe is broken and it’s a sheer emergency but before the plumber arrives, try managing yourself. Arrest the water from getting to the broken point of pipe, turn off the valve. If you do not find any shut-off valves just turn off the main valve. Rest the plumber can handle upon arrival.

Why do you need a professional emergency plumber?

Even if you have managed some repairs yourself, it’s important to consult a professional plumbing agency and make use of their tips. They keep on suggesting clients to use strainers to cover the drain openings. What you do is a temporary solution and if those are not mended entirely, it might lead to a further issue in future. Our trained plumbers are experts in finding out the problem and repair it from the root than any patchwork and they have all necessary tools.

clogged kitchen sink drain overland parkYou might know a few basic plumbing methods but you are not an expert; so it’s recommended to call a professional when required. Look for references if you are looking for a plumber in your area. Compare the prices and the quality of service and definitely whether they offer emergency service or not. 

In times of crisis, remember you have our shoulders to fall back on. Our plumbers are ready to offer assistance and ensure the system is back to normal, functioning properly. This saves you from all hassles and worries; you can really consider it as beneficial. If you are looking for a reliable and trustworthy plumbing service provider for both routine and emergency, we are here for you. Call (816) 384-1295 today!

Posted on: April 2, 2018

Stop Wasting Water This Year and Do These Top 3 Plumbing Upgrades

The start of the year is always a perfect time to assess your home’s current plumbing system and think about upgrades.  For one, you can replace your current plumbing fixtures to ones that can help you save money in terms of water expenses.

All you have to do is find a local plumber in Chicago who can efficiently deliver this task (that’s what we’re here for!)

Consider these upgrades if you want to save water this year

Water Saving Shower Heads

ultra low flow shower headDid you know that showering accounts for almost 17% of an American home’s total water consumption?

A typical shower can dispense as much as 2.5 gallons of water per minute, and that’s a lot! Licensed plumbers in Chicago can attest to this. Replacing shower heads is the easiest solution.

Luckily, there are lots of ultra-low flowing shower heads available in home improvement store and plumbing supply shops.  Once you find a local plumber in Chicago, you can mention about this and ask for his suggested best brands.

Low Flow Faucet Aerator for the Kitchen and Bathroom

low flow faucet aeratorLow flowing bathroom and kitchen faucets have aerators that work to lessen the flow of water while keeping the water pressure constant. Be concerned if your kitchen or bathroom faucet dispenses more than two gallons of water per minute. Ideally, it should only be 1.5 gallons per minutes. If budget is your concern because of the number of faucets to be replaced in your home, you can opt to replace two faucets first and then go on with the rest in the coming months. Or, find plumbing services in Chicago that offer promos or discounted offers for projects like this one.

This could also be a cause of concern for commercial establishments. Just imagine the number of low flow faucet aerators they will need! Then again, the key here is to find local contractors in Chicago that will charge affordably.

Dual-Flush Toilets

dual flush toilet buttonMore and more bathrooms are being replaced with dual-flush toilets that only use up to 1.28 gallons of water per flush. These toilets have two buttons for flushing – one for flushing liquid wastes and the other for flushing solid wastes. This way, you will only flush water that you need.

The dual-flush toilet is revolutionary and highly-effective in saving water. In fact, new buildings in Australia, New Zealand, Singapore, and Israel are required to install dual-flush toilets. You must remember though that it is more expensive than the regular toiles. Then again, think about the amount of money and water you will save in the long run.

Let Us Help You Find a Local Plumber in Chicago

Plumbers 911 is a reliable plumbing company in Chicago that has a wide list of licensed plumbers. You do not need to go far to find a local plumber in Chicago. All you have to do is call us and we can dispatch a 24-hour plumber in IL to your home in less than an hour.

 

Schedule a visit today by calling (877) 445-6127. But before you go, make sure that you check out our coupon page to get $50 off on your initial service call!  

Plumbers 911` Chicago discount coupon

Posted on: January 15, 2018