Category: Grease Trap Maintenance

The Basics on Grease Trap Installation in Nederland

grease trap installation in Nederland, TXA grease trap or grease arrestor is a device that prevents fats, oils, and grease (FOG) from reaching the city’s sanitary sewer system. Like in other states, cities and municipalities in Texas require restaurants and other food service shops to install a grease trap in their kitchens or sewers. Are you a Nederland restaurant owner who needs to have a grease trap installed? Read this article first to know about the basics of grease trap installation in Nederland.

 

Frequently Asked Questions about Grease Traps

  1. What is a grease trap? Simply put, a grease trap is a device that filters grease and oil from wastewater. It is highly effective and can remove up to 90% of grease, oils, and fats, in the water.
  2. What does FOG mean? FOG stands for Fats, Oils, and Grease. This is the official term used in government regulation documents.
  3. Are grease traps also used for showers or bathrooms? Grease traps are only installed in kitchens and specified areas in restaurants. Grease traps are need in kitchens that deal with a large volume of food wastes every day.
  4. What is a grease trap made of? Grease traps can either be made by plastic or metal. Whatever the material it is made of, what’s important is that it is cleaned regularly. Some grease traps can be cleaned manually. However, larger versions need to be pumped by a professional Nederland plumber.
  5. How much grease can they trap? Grease traps come in different sizes. Smaller units can handle 4 to 8 gallons of waste water per minute. Choose a larger unit that can handle 25 to 50 gallons per minute for larger kitchens.
  6. How much does a grease trap installation in Nederland cost? Grease trap prices ranges from $150 to $1,000. Larger units cost greater, of course.

Call Plumbers 911 for Grease Trap Installation in Nederland

Plumbers 911 offers grease trap installation in Nederland. The company refers only licensed Nederland plumbers who are highly capable of installing grease traps. Avoid hiring non-professionals that might wreak havoc on your kitchen drain system. Call Plumbers 911 Texas today at (409) 237-3137 to schedule an appointment!

Posted on: September 4, 2017

The Importance of Installing Grease Traps in Bal Harbour Restaurants

interceptor grease traps in Bal HarbourExperienced cooks will tell you that pouring grease down a kitchen sink’s drain is a no-no. When grease solidifies, it tends to block drains and cause major clogs that could cause plumbing expenses. Whether in a home kitchen or a big restaurant kitchen, the problem of discarding grease stays the same. Bal Harbour homeowners become concerned with grease build-ups that they have grease traps installed in their kitchen sinks. It becomes even more important to install grease traps in Bal Harbour restaurants especially when state laws begin to regulate grease discharge. In fact, Miami-Dade County has an existing Fats, Oils, and Grease (FOG) Control Program that regulates grease discharge of food service establishments.

Why Install Grease Traps in Bal Harbour Restaurants

The city government regulates grease discharge of restaurants or cafeterias obviously because of the amount of grease and fat they produce daily. A large amount of grease discharged in the drains will already cause problems for the city’s main sewer lines. This is precisely why grease traps were invented and engineered. These nifty devices do not only trap grease but also make it available for recycling. Large regions such as Miami-Dade County have discovered that almost half of the city’s sewer problems are caused by blockages of solid grease.

What Kind of Grease Trap to Use

Commercial kitchens in restaurants and cafeterias differ in size and foods that are normally prepared. Therefore, the requirements for grease trap interceptors will also differ. There are different designs of grease traps and interceptors that food service establishments can choose from.

There are automatic grease traps that are designed to automatically remove grease from dishwasher waste water. Dishwashing also accounts for the high amounts of grease generated by restaurants and cafeterias. Automatic grease traps capture grease and save it beside the dishwasher or drain. The downside of this though is that it needs to be emptied on a daily basis. Restaurant staff should be trained to do this.

Automatic grease traps can also be used by food establishments that bake or roast meats like chicken and pork. The device can collect grease drippings and save it for recycling.

Meanwhile, a compact grease trap would be perfect for restaurants and cafeterias that have a small kitchen space. It can still store up to 200 gallons of grease despite its size.

An effective grease trap device will be able to capture at least 98% of grease floating in the water. Just imagine the amount of grease that is supposed to go down the city sewers! When collected properly in a tank, this grease can be recycled and reused.

Hire a Pro to Install  and Maintain a Grease Trap in Your Bal Harbour Restaurant

As mentioned, there are grease trap models that cannot be accessed by kitchen staff. A licensed Bal Harbour plumber should take over for tasks such as this. Moreover, large quantities of grease for disposal should only be handled by the pros. Certified plumbers would be able to dispose of grease according to the city’s codes.

Should you need a professional Bal Harbour plumber to install a maintain a grease trap in your establishment, all you need to do is call (305) 699-3368 to schedule a visit.

 

Posted on: August 11, 2017

How Often Should You Clean Your Grease Traps

plumbing service Miami SpringsGrease traps are commonly found in commercial spaces and functions as a separator between the wastewater discharged to Miami Springs’ sanitary sewer system and solids and FOGs (fats, oils, and grease) in the food preparation waster.

Most city requirements include mandates to clean grease traps at least once every three months. It is very clear in the requirements that all grease traps in establishments must be thoroughly cleaned when the solid and grease accumulation reaches at least 50% of the grease trap’s wetter weight. Interior grease traps on the other hand has to be cleaned on a monthly basis.

But the question is, “Are you willing to clean your own grease traps?” To save on expenses, this may come into your mind. A grease trap is really an expense for every food establishment so others go the DIY route. Manufacturers of grease traps recommend a thorough weekly cleaning, and by weekly, I mean it is completely drained, greases removed and scraped with all the solids. This is something not feasible for establishments because it requires time, manpower and money to have this cleaned.

Ideally, a grease trap has to be cleaned when its solid fraction is 25% and the grease fraction is also 25%. If you have these figures on your grease traps (or more!) then there is a higher risk of grease and solids flowing down your drain pipes. More of these could cause a messy backup!

A backup is a major problem. Not just because it is costly because emergency drain cleanings will skyrocket, but it could pose a major disruption in your business and you would lost revenues and dissatisfied customers. To avoid this, it is best to practice regular grease traps maintenance to protect your business.

If you are planning for a grease trap cleaning or maintenance, get the services of a licensed Miami Springs technician. The network of plumbers of Plumbers 911 offer full installation and capabilities to handle grease trap installation and maintenance. They don’t just jump into the task and complete it. Part of their grease trap service is to check the entire kitchen drain system. They also know that a plumbing snake is of no use, instead they use high-pressure water jetting to clean the pipe and remove grease build-up and solid debris along the pipeline. This way of cleaning flushes out the system in an environmentally safe way.

Still undecided to call a plumbing service? Remember that failure to meet any of these requirements and documentation on grease traps is a violation on the city code! You could be fined with $2000 or more each day.

These plumbers are available 24/7, all days of the year to provide any kind of plumbing service to everyone who needs it. They offer other plumbing services such as sub-meter installation in Miami Springs, camera and sewer inspection in Miami Springs, and water heater services in Miami Springs to name a few.

Posted on: July 28, 2016

Grease Trap Emptying: How Is This Done?

grease-trap-emptyingWe believe we have mentioned several times that grease, fats and sludge are bad for your septic system. Over time, these things can accumulate inside the system and result to blockages that will disrupt the flow of sewage inside the pipes or clog the septic tank. For these very reasons, grease traps are valuable parts of a plumbing system. They are specifically designed to contain these substances and prevent them from getting into your drainage and septic systems. However, you should know that in order for grease traps to work properly and efficiently, they must be maintained and cleaned regularly, too. If you’re wondering how this process is done, read on and find out!

1. The grease trap’s lid will be pried open with a bar. This should be done properly to avoid damaging the gaskets that are installed just right under the lid. If these are damaged, they should be replaced immediately.

2. After the removal of the cover, the components of the grease trap will be inspected. They will be removed and replaced for cleaning.

3. Moving forward, a wooden dowel or some sort of measuring stick will be inserted into the trap. This will be gently pushed down to the bottom of the container and swirled lightly for the plumber to measure the amount of sludge and grease inside the trap.

4. The dowel will be removed and a tape measure will be used to identify how many inches of sludge are there. The value will be recorded for the report issued by the EPA.

5. After the measurement is taken, a small bucket will be used to scoop out the water from the grease trap. The waste materials will be collected and then disposed properly later on.

6. The solidified waste will be removed as well. It will be transferred into a water-tight container to avoid spilling.

7. Now there should be some waste residues lining the sides of the trap. These will be scraped off as well. To clean the trap better, a dry / wet vacuum will be used to siphon out smaller pieces of waste materials.

8. Afterward, the trap’s lids, sides and components will be cleaned and washed with soap and tap water. A steel scrubber should help eradicate any remaining waste inside the trap. The components of the trap will be flushed with water to get rid of the soap and other debris.

9. Once all cleaned up, the parts of the grease traps will be re-installed one by one. Finally, the lid will be put back onto the trap and secured.

We hope that you learned a lot about grease trap emptying. If you need your grease traps cleaned today, call Plumbers 911 Washington DC. We promise to refer only the best emergency plumber in Rockville that provides exceptional septic tank cleaning in Rockville, drain cleaning in Rockville, garbage disposal repair in Rockville and repairs for clogged toilet in Rockville. Call us at (877) 932-5325 to schedule a service!

Meanwhile, watch this video to get tips on how you should hire the right plumber in Washington DC!

Posted on: February 17, 2016