Category: Faucet Repair

How to fix a dripping tap in your Chicago Home

Leaky kitchen faucetA dripping tap means wastage of water and rising water bills without any use (which could be really expensive!)  It could also lead to damage of property raising your insurance claims.

Repairing is the best solution, you may try some DIY  procedures to fix your dripping tap, or,  you can avoid the hassle and contact a professional plumber in Chicago.

There are many plumbing agencies that offer smart service by immediately fixing dripping taps. In case you have some technical skills and wish to try out things on your own at first, you can follow the steps.

At first you need to turn off the water supply and this is really easy when the isolation vales are located in close proximity to the tap. You can even identify whether ceramic washers are fixed to the tap or rubber washers.

If you have a rubber washer tap, you simply need to change the small washer and if it’s a ceramic one, you need to replace the entire valve. Torn O-rings are usually the cause of a leaking tap mainly in the kitchen. So if the tap is still dripping water after replacing the washer, it’s the O-rings that are responsible.

Rubber washers are delicate so you need to protect and take adequate care while turning the tap on and off. Do not over-tighten while turning off the tap to prevent a dripping tap.

Steps to fixing a dripping tap

  1. Turn the water supply – Run the tap and make sure there is no more water in it.
  2. The screw – The screw is important because it hold the entire tap in a place together. Loosen the screws to make necessary repairs. The screw is mainly hidden beneath the stylish cold and hot caps located on the tap top or sometimes beneath the cold and hot indicator. It’s easy to use your hands to unscrew the caps or just use a screwdriver.
  3. Taking tap apart – You need to take off the head of the tap and there could be a piece of metal covering the tap neck safeguarding the valve, just take that off as well.remodeling a kitchen in High Springs
  4. Ceramic disc replacement–The metal shroud covers the valve, use an adjustable spanner to turn it, once it’s loose just remove. Place the new cartridge in and fix the tap.
  5. Changing the rubber washer–Slide the old rubber washer and put on the new one. Put back the valve and the tap back
  6. O-ring replacement–The O-ring is a bigger size washer located at the bottom of the tap spout. The O-ring is located at the base; take a screw-driver to replace the old ring with the new one. Use a pair of scissors to snip it off and tighten the grub screw again.

Its wise of you get repair a dripping tap on time, or else you might have to call an emergency plumber agency in your Chicago home. It’s a real head ache if the tap continues to drip and if you cannot spot the problem, call a plumber.

Posted on: July 5, 2018

Biggest Plumbing Myths One Should Be Aware Of

There are few plumbing myths that most homeowners believe and most of them are aware of the various plumbing issues. Usually homeowners consider plumbing as an emergency service and when not required its ‘out of sight and out of mind’. So here is taking a look at some of the expensive plumbing myths:

If the drains are all working, all are in good condition – Its good to know that just because the drains are working, it does not mean that everything is working fine. Sometimes there are food particles gathering right inside the discharge pipe and homeowners might not be aware. It’s best to look out for early signs, whether there is slow drainage or improper disposal unit.

A faucet leaking is not a big deal – Leaky faucets can not only cause hiking water bills but also lot of corrosion to the faucets and plumbing fixtures. If the leakage is continuous, it could lead to mold, rust and rotting. Nip the issue in the bud and don’t sit over a leaky faucet thinking everything is fine. If you don’t have experience, don’t try your hands on DIY but call a plumber for maintenance. Plumber putty is not a permanent solution at all that most people think.

A little water stain is a normal thing – A little water stain can be an indication of a huge problem. Its better not to ignore plumbing maintenance works because you never know when this small thing is going to turn out to be a big leak. Water has the ability to travel at length along horizontal surfaces and there might be a bigger leak hiding behind the stain. Anytime you see even a little stain, call a professional plumber.

Hard water does not harmHard water is a complete nuisance because it can result in mineral deposits on all plumbing fixtures and cause a scale to form over the pipes. Hard water contains magnesium and calcium carbonates that causes so much deposition.

Low water pressure is not much inconvenience – Do you know that water pressure problems cause leakage in pipes? Leaks are a real mess as it can travel below homes and cause damage to the foundation and infrastructure. Call a plumber if water starts trickling.

Toilets are a great place for garbage disposal – Please keep in mind that you should not flush anything down the toilet. Due to garbage disposal, your bathroom can be overflowing, you might have to call emergency plumbing and indulge in a lot of cleanups. Don’t dispose of items like thick skins, shells, tough pieces of meat or else you might need a plumber in Kansas anytime. Do not try using in-tank toilet cleaners as they have lots of bleach that actually damage the inner walls of the toilet, instead use in-bowl cleaners.

CONCLUSION :Brasher Falls plumbing fixing sink

Now that you know the myths, you might be thinking that you do not know about plumbing. Yes, exactly and this is why there are professionals to perform such specialized services. Each and every home cannot escape from plumbing in Kansas and when the issue is serious, the investment is a huge one and as such it’s best to call a plumber for maintenance. Believing in myths is a complete myth, live the reality and have a well-maintained property. All plumbers are not the same therefore get in touch with a reputed and experienced company that has a good record of client servicing and support. Call us for 24/7 emergency plumbing Kansas City : (816) 384-1295 today !

Posted on: April 13, 2018

Stop Wasting Water This Year and Do These Top 3 Plumbing Upgrades

The start of the year is always a perfect time to assess your home’s current plumbing system and think about upgrades.  For one, you can replace your current plumbing fixtures to ones that can help you save money in terms of water expenses.

All you have to do is find a local plumber in Chicago who can efficiently deliver this task (that’s what we’re here for!)

Consider these upgrades if you want to save water this year

Water Saving Shower Heads

ultra low flow shower headDid you know that showering accounts for almost 17% of an American home’s total water consumption?

A typical shower can dispense as much as 2.5 gallons of water per minute, and that’s a lot! Licensed plumbers in Chicago can attest to this. Replacing shower heads is the easiest solution.

Luckily, there are lots of ultra-low flowing shower heads available in home improvement store and plumbing supply shops.  Once you find a local plumber in Chicago, you can mention about this and ask for his suggested best brands.

Low Flow Faucet Aerator for the Kitchen and Bathroom

low flow faucet aeratorLow flowing bathroom and kitchen faucets have aerators that work to lessen the flow of water while keeping the water pressure constant. Be concerned if your kitchen or bathroom faucet dispenses more than two gallons of water per minute. Ideally, it should only be 1.5 gallons per minutes. If budget is your concern because of the number of faucets to be replaced in your home, you can opt to replace two faucets first and then go on with the rest in the coming months. Or, find plumbing services in Chicago that offer promos or discounted offers for projects like this one.

This could also be a cause of concern for commercial establishments. Just imagine the number of low flow faucet aerators they will need! Then again, the key here is to find local contractors in Chicago that will charge affordably.

Dual-Flush Toilets

dual flush toilet buttonMore and more bathrooms are being replaced with dual-flush toilets that only use up to 1.28 gallons of water per flush. These toilets have two buttons for flushing – one for flushing liquid wastes and the other for flushing solid wastes. This way, you will only flush water that you need.

The dual-flush toilet is revolutionary and highly-effective in saving water. In fact, new buildings in Australia, New Zealand, Singapore, and Israel are required to install dual-flush toilets. You must remember though that it is more expensive than the regular toiles. Then again, think about the amount of money and water you will save in the long run.

Let Us Help You Find a Local Plumber in Chicago

Plumbers 911 is a reliable plumbing company in Chicago that has a wide list of licensed plumbers. You do not need to go far to find a local plumber in Chicago. All you have to do is call us and we can dispatch a 24-hour plumber in IL to your home in less than an hour.

 

Schedule a visit today by calling (877) 445-6127. But before you go, make sure that you check out our coupon page to get $50 off on your initial service call!  

Plumbers 911` Chicago discount coupon

Posted on: January 15, 2018

Debunk These Plumbing Myths Right Now Or Hate Yourself Later

Some people know plumbing repair hacks – or at least they think so. Then again, if this is the case, then why do we often hear callers from Kansas City and other cities we service say, “What do you think did I do wrong?” You know, it is an advantage to know plumbing skills but it is an even greater advantage once you know what plumbing tip is a myth or a fact.  So we listed down these biggest plumbing myths debunked by a reliable local Kansas plumber. We hope that after reading this, you would, too!

 

Stop Believing These Infamous Plumbing Myths!

 

Anything You Flush Is Gone Forever

Just because it went down the drain doesn’t mean that it’s out of your life forever! Anything liquid can be flushed down easily. Solid wastes, most probably if biodegradable. Toilet paper and wipes? Yes, if flushable but not recommended. Plastics (like your kid’s toy) are a definite no-no!

 

Understand that what you flush goes through the drain pipes in your plumbing system. Then it either goes to the city sewers or your home’s septic tank if you have one. What you flush should not be something that will possibly cause clogging or, worse, flooding in your bathroom. If you’ve been doing this for some time now, maybe it’s best to have your plumbing system checked by a licensed Kansas City plumber near you.

 

You Can Shoot Whatever You Want In the Garbage Disposal

need garbage disposal repair expertHere’s the deal… your garbage disposal is not a garbage shoot. Not all food wastes can be shredded into pieces by a garbage disposal unless you want to meet our every-ready local Kansas plumber soon. Hard food wastes such as bones and shells must be avoided in all instances. Also, and this is the fact that surprises people the most, fibrous food wastes like onion skins can wrap around the teeth of the disposal and cause it to jam. Grease, meat fat, and oils coat the garbage disposal blades and dull it.

 

Close a Tap Ever So Tightly To Prevent Leaks

tighten faucet handleWrong. The tighter the faucet handle, the greater chances it is to be damaged. In fact, it is one of the most common causes of leaks according to local plumbers in Kansas. In fact, it can even cause broken pipes. Tighten it just right and you’ll avoid future plumbing problems.

 

 

Call Plumbers 911 and We’ll Send an Expert Local Kansas Plumber Right Away

Your home is one of your biggest assets so do not take your plumbing system for granted. Call us and we can send a licensed Kansas City Plumber right away to check if you have a problem brewing inside your pipes. Call us at (816) 429-1638 to be connected to our operator ASAP.

 

local Kansas plumber contact number
CLICK THIS TO CALL US!

 

Posted on: January 8, 2018

Quickly Fix Your Faucet in Essex with These Tips

faucet repair essexYour bathroom holds a significant part of home as this is probably the only place where you can be your own self, have private warm baths, and do some vanity. This is why most homeowners spend a fortune on bathroom fixtures such as the shower faucets and tub. And because of wear and tear, there would be times when damages are experienced.

These days, there are so many DIY tips online via videos or blogs. You can use them to fix some plumbing appliance or fixtures but before fixing anything yourself, do some research first to get to know the different things necessary in faucet repair in Essex.

The Design of the Faucet

Faucets come in various designs. There are designs with single handles, quite convenient as it controls the temperature as the water flows out of the faucet. There is also a type of faucet with double handles controlling the hot and cold water separately. To choose which one is best for you, imagine yourself using the faucet and you turn the lever.

If you see yourself controlling two levers to get the right temperature, better choose the double lever type. There are a lot of available designs for faucets these days. You can even mix and match it depending on your preference. To ensure the synchronization of designs, buy all fixtures from one manufacturer.

Washers and Seats

Old faucet designs normally have washers. The function of this is to block water from dripping. On the other hand, a seat compresses the washer against the faucet handle when tightened.

Repair Tips from a Professional Essex Plumber

During the repair, you will notice that there would be drips to fix. You will need to replace the seats or washers if this happens.

Once you notice this, turn off the water from the main water line in order to perform the repair well. When your water is off, the removal of outer trips without any issues. The removal of trims will require you to carefully remove the handle. Once the cap is removed and the screw is exposed, get it out immediately. Remove the handle carefully with pliers to prevent stuck up.

Next is deal with the valve system. You need to hold the handle back a few seconds then try to open the valve half way. This process releases the pressure thus helping you unscrew the remaining pieces. Just make sure you’re opening the correct pipe.

Once you find out that the washer is broken, then most likely this is causing the leakage in your faucet. Purchase a new one if this happens!

You can also check the seats. As they are the ones being pushed by the washer to stop the water flow, you also need to ensure that this part is replaced to avoid any rework.

If you think that faucet repair is something that you cannot do, then we recommend that you contact a plumbing expert in Essex right away.  This ensures that you won’t be wasting money, resources, and time in fixing your faucet.

Posted on: May 27, 2017