Category: Drain Repair

10 Vital Tips to Avoid a Flooded Basement in Your Chicago Home


Water in Basement ChicagoMost people are excited to welcome spring after a long wait during chilly winter nights. I guess because we can all agree that we can enjoy the sound of the city or nature when we go out and do some outdoor activities.

Above all, we can dictate whatever we want to wear when it comes to fashion and for most men and women who are meticulous in looking trendy would probably agree.

Unfortunately for some people, spring is what they dread the most among all seasons. Why? Because for some residents when winter is over they would have to deal with a flooded basement and this is no laughing matter. This could be very dangerous since it can damage your appliances or any electrical equipment, your property and this can also be hazardous to your family members’ health.

How to Prevent Clogged Drains in Your Basement Floor

If your basement floor drain is clogged and water stays in your basement floor for a long time this can cause black molds to grow around your basement which is unacceptable for any household, it can be a breeding ground for mosquitoes and not to mention that termites might eventually be a problem as well.

There are a number of reasons why basement floors can be floodedafter winter or during springfrom cracked walls, clogged floor drains and pipes, to broken sump pumpsHaving to clean up a flooded basement is a tough and ugly task and very expensive too!

So, we strongly urge you to read on and be well-informed so you can avoid a water flooding basement and save yourself from stress and most importantly from drilling a hole in your pocket.

In This Article We Will Be Covering:

  • Top 5 reasons of basement flooding
  • 7 Ways to keep your basement safe & dry
  • 10 significant guidelines to avoid basement flooding
  • 6 important tips in maintaining your sump pumps 


5 Causes of Basement Flooding You Cannot Ignore

my basement is flooded in ChicagoHow to stop basement flooding is indeed a difficult job and it is one of the
worse plumbing problems that a lot of residential owners have to deal with.

Other homeowners just choose to wait it out until the water goes down and let everything dry for a few days, weeks or even months. This is definitely not a very wise decision to make if you really care about your home and your family.

You’re going to have to face the consequences in the long run if you choose to let the water subside by itself. Bear in mind that stagnant water can be the cause of a lot of problems and to mention a few… This can be a breeding ground for bacteria and mold. You’re also at risk of electrocution if you step into the water that has reached your electrical wall sockets.

So, to avoid these predicaments, you need to understand the causes of water leaking into basement.Then, you need to address it quickly if you see any of these problems listed below.

  • Bad location for your home – One of the most common causes of basement flooding is the location of your house. Houses are usually constructed on flat or even sloped grounds.This can allow water to drain during extreme weather conditions.On the other hand, houses that are built on low areas or basin-like terrains are most likely to have flooded basements.When snow starts to melt after winter or heavy rains come during spring, this means a huge amount of water is released. This will trap accumulated water so it will eventfully find its way through your basement walls and floors resulting into flooding.
  • Weak floors and walls – Bad flooring and weakwall sealing is another reason for having a flooded basement. If your flooring was not installed properly, meaning if the tiles were left with small cracks or the adhesive or sealant was not properly applied when your house was being constructed, during downpours there will be water coming up through basement floors.

Same goes for your basement walls, if your walls were not properly constructed and have small cracks or poor sealing, chances are water will also go through those smalls cracks and will later on flood your basement floors.

  • Blocked eavestroughs & down spouts – If your gutters and down spouts are clogged, this could also be the cause of flooding your basement. The reason is when heavy rains come, water will overflow from your gutters and this may lead to water going to the ceilings, down through your property’s foundation and walls.Then it will soon be inevitable to have a flooded basement. However, you might be facing a much more difficult situation besides flooding. Your house’ foundation may even be at risk of collapsing when soaked with water for a long period of time. The walls, beams and posts may weaken and eventually give in.
  • Poor drainage system – A drainage system, particularly a downspout in your home must be properly installed. If not, this may lead to leaks. If the downspout for instance, was installed a little too close to the basement walls, or even if it drains out directly to your basement walls, the water may go through it and may cause flooding.

Remember, that downspouts are meant to drain outside your residence going to the streets and gutters. This should not be installed any closer to basement walls.

  • Clogged Gutters – The street gutters, when blocked or congested this can be another reason for flooding. For example, when the pipeline manifold that connects your plumbing system in your house to the public sewer system is blocked, then this may cause flooding on your residence.

The water level may increase rapidly because of this so it is imperative that you contact a reliable plumbing company to address this issue as this could also destroy your property since it will weaken the structure and foundation of your home.

book appointment with 24/7 Mount Prospect plumber

Top 7 Tips for Caring & Maintaining Your Basement

Leaky basement fix in ChicagoIf you want to avoid any damage in your property and spending an arm and a leg for a basement flood clean up, you must invest in your basement’s maintenance and care.

A wet basement can result into black mold and fungus. Therefore, this can lead to a number of health issues and this could be a huge threat to your loved ones.

Black mold grows if a place is exposed to moisture usually coming from dry walls, carpets, rags and flooring. Usually, the first sign of mold growth is when you smell something musty in your basement.

The inhalation and ingestion of these spores can primarily target the respiratory system and the effects are usually asthma, chronic coughing, sneezing, fatigue, severe allergies, and also eye irritation, nose and throat irritation, constant headaches, rashes etc. Prolonged exposure to black mold can be very dangerous.

So, ensure that your basement is always clean and free from any moisture to avoid black mold poisoning. Read below to help you learn about these important tips on how to waterproof a basement to keep it safe and dry.

  • Apply water proof paint – During heavy rains, moisture and condensation can cause your basement walls to leak. This problem can be prevented easily by just applying a high-end water resistant paint on your basement walls.
  • Use portable heaters or dehumidifiers – Depending on the amount of moisture you have in your basement; a dehumidifier is good for absorbing excess moisture so if your basement has only minimal moisture the dehumidifier will do the job.

Otherwise, a portable heater could be a valuable equipment in drying out your walls, floors carpets, rags, curtains if you have an excessive amount of moisture in your basement. You may need to use more than one heater if necessary.

  • Water pipes must be insulated – Make sure that your water pipes are covered with insulation. Frozen or cold water pipes may have moisture or condensation on the surface.

You need to insulate your basement water pipes to avoid problems such as mold growth and fungus. Be meticulous and ensure that you have no problems or any leaks in your basement plumbing system.

  • Don’t dry clothes in your basement – Another cause of moisture is by drying clothes and this can eventually be bad if you do this in your basement. By drying your clothes in your basement, it contributes to the humidity and condensation around the area.

Better yet, use dryers or might as well dry your clothes outdoors under the heat of the sun.

  • Surround gravel and rocks around basement – One of the best ways to dry moisture is to use gravel and rocks. This method is inexpensive and they can absorb condensation easily.Put some gravel and rocks around the perimeter or outer edge of your basement. This will definitely reduce moisture accumulation from the foundation of your house.
  • Roots from trees – If you have a garden and huge trees that surround your
    home, you need to inspect that the tree roots are not hindering your underground water pipes.Otherwise, this can disrupt the water flowing through the pipes from your basement causing leakage and eventually water will find its way through the basement walls and it will definitely flood your basement. To be safe, be sure that the trees are at least planted 20 feet away from your home’s foundation.
  • Plumbing lines – Have a regular inspection and check your plumbing lines in your home. Always make sure that there are no cracks or gaps in your pipes that can let water in during heavy rains. If in case you see any cracks you need to fix it immediately and use a water proof epoxy to seal the gaps and that should do the work.  

    basement flooding pump in Chicago


    10 Valuable Guidelines to Ensure Your Basement Won’t Flood

  • Water should flow away from the house –Water accumulation is often because of poor location or wrong landscaping. Even if you have a good basement drain system, you have to make sure that your home is located in a high ground or sloped terrain so when it rains the water will flow down and away from your residence.

Chicago basement floor drainThis will guarantee that rain water will not be trapped in your land and therefore, will not find its way to your basement walls and floors. The foundation of your home will be safe as well.

Most people love to have a beautiful garden especially if it’s close to the windows. However, the downside of it is if the landscaping isn’t done properly this could allow water to accumulate near your home’s foundation. Eventually allowing water to seep in your basement floors.

  • Secure gutters and downspouts – Your home must have adequate system for collecting and getting rid of rain water and melted snow. Installing brand new and sturdy gutters and downspouts will ensure long usage and that they will not fail easily.Also, ensure that your gutters and downspouts are free from any obstructions or debris so there won’t be any overflows or back-ups. You need to make sure that the downspouts are 5 to 6 feet away from your house and more importantly, that water is flowing away from your foundations and walls. You might need to consider extending your downspout pipes if necessary.
  • No cracks on walls and floors – One important thing that you have to make sure is that your walls and floor tiles must be free from any cracks to avoid flooring for basement that floods. You need to be thorough and meticulously inspect your walls and floors. Whether the cracks are big or small, you need to treat them the same and resolve it the earliest possible.

You may use epoxy sealant to seal and fill small cracks on your walls and floors. However, for a more intricate crack issues you might consider doing a masonry job for sealing bigger cracks.

  • Working sump pumps – This is one of the most important equipment if not the most important one in your basement. It will absolutely save you from a major basement flooding clean up.Sump pumps will help you save your appliances in your basement from soakingand will also avoid getting the water level higher and reaching your wall sockets. That will save you from electrical problems and most importantly it will save you from being electrocuted. 

You need to check and be sure that your sump pump is free from any debris. If you are using a portable sump pump, you may want to place it in the lowest part of your basement. Also, be sure that it is connected to a power source.

  • Maintain sewers and septic tanks – Your sewers and septic tanks play a significant role in your household and plumbing system. You need to have an inspection to your sewers and also have your septic tanks cleaned.During the heavy rainfall, you may have a clogged sewer drain in basement due to accumulation of debris and septic tanks can overflow or back up and this can be a potential danger.
  • Secure generators – Bear in mind that a sump pump is powered by electricity, so if there is power outage your sump pump will definitely not work. What you need is a contingency plan. You may want to secure a generator in your house particularly in your basement that is always ready to power your sump pump.

Remember, that this may be a good investment for your home especially if you live in a place where there are frequent storms that happen and a lot of black outs.

  • Make sure appliances vent outdoors – In most cases, people choose to put their washing machines in their basements. If this can’t be avoided and there are no other places where you can do the laundry – Just be sure that the washer and dryer are connected properly.

Also, you need to ensure that the dryer vents out the air outdoors and not in the basement so this can’t create condensation and moisture. Be sure to always check and inspect your washer if there are any leaks. 

  • Install exhaust fans – Bathrooms and showers in the basement are contributing factors to humidity. You need to install exhaust fans in your basement to control humidity levels, to also get rid of moisture and improve your basement’s ventilation.

During hot sunny days, you may want to leave your basement windows open to allow hot air to come in which can be good to drying up moisture. Close your basement windows during cold breezy days.

  • Install metal window wells – Another thing you have to consider is to install metal window wells in your basement. Basement windows may retain water especially if not properly installed.Ensure that your metal window wells are properly secured and cover it with gravel or pebbles. This will prevent water from seeping through the windows going to your basement floors.
  • Be sure your property is insured – Depending on your insurance company and coverage but usually insurance companies do not cover flooding and sewer backups.You need to thoroughly review your insurance policy to probably consider increasing your coverage or ensuring that flooding and other plumbing catastrophes are included.

    6 Steps to Maintain your Sump Pump & Properly Drain Your Basement

basement sump in ChicagoBasement sump pumps are generally dependable and this can really save you from a lot of stress and spending too much.

As time goes by, the sump pump could wear down just like any other equipment in your house. So, it is best to always maintain a regular maintenance to ensure that your sump pump is always working and will not fail during heavy rains.

Spend time inspecting your sump pumps every two months or before the storm comes. It is a small price to pay rather than being faced with a murky, flooded basement. Learn these basic steps to maintain your sump pump so you wouldn’t have to worry anymore when the next storm comes or in early spring.

  • Ground Fault Circuit Interrupter (GFCI) – You need to be sure that the sump pump is plugged in properly to a ground fault circuit interrupter (GFCI) outlet and you need to be sure that this is working and the cord is in a very good shape.

You can reset your GFCI if necessary and you must check itperiodically. GFCI breakers may trip in some cases, automatically shutting off your sump pump.

  • Secure sump pump upright – Be sure that your sump pump is standing upright at a flat surface since it has a tendency to vibrate during operations and this can cause the pump to fall or even tilt on one side. This can cause the float to jam and this cannot activate the pump.
  • Test periodically – Test your sump pumps regularly by pouring a pale of water into the pit. This is to ensure that the pump starts automatically. This is to make sure that the water drains fast once your pump is on. If for some reason, your pump does not work you need to call in a professional plumber from Plumbers 911 to have checked.
  • Clean the grate – You need to take off the submersible pump from the pit then you have to clean the grate at the bottom. When the sump pump operates, and starts pumping water it can also suck small stones and gravels into the grate, resulting into inlet blockage. This will eventually damage the pump overtime.
  • Connecting pipes sealed tightly – To avoid any mishaps, ensure that the outlet pipes are securely tight and joined together. Make sure also that it is draining at least 20 feet away or six meters from your home’s foundation to avoid damages.
  • Vent hole is clear – The vent hole or weep hole prevents the pump from going in to air-lock. It is when the sump pump is running but it is not delivering water. Make sure the vent hole in the discharge is free from any obstruction and that is it clear. 

    Plumbers 911` Chicago discount coupon

Why Hiring Professional Plumbers to Inspect Your Basement in Your Chicago Home is a Must

water in basement clean up in ChigacoBeing prepared is always the best recipe for any catastrophes. So, before early spring comes or before any storm threatens your home – be sure that your basement is water proof and has a perfectly working sump pump.

Trust only a reliable and dependable plumbing company that will surely address all your plumbing problems, call Plumbers 911 Chicago. Backed by years of experience, we guarantee fast and quality service that no plumbing company can top.

All our plumbing contractors are licensed, bonded and insured. They have also undergone over 10,000 hours of intensive plumbing training and you are rest-assured that your household will be in good hands.

With the help of high-end plumbing tools and top of the line equipment, you can always be sure that we can solve any plumbing problems, big or small. So, the next time you need plumbing help basement water leak repair in Chicago, call only the country’s most leading plumbing company you can find.

Leave it to us! We will definitely flush all your plumbing worries down the drain. Contact us today!

Watch this short video to learn more about Plumbers 911!

Posted on: March 26, 2019

6 Ways to Care for Your Pipes in Your Chicago Home

pipe maintenance chicagoHome plumbing, though not recommended to non-professionals, can be achieved if homeowners take extra precautions in performing proper maintenance.

This can be done if you have the proper equipment and skills needed to fix anything on your plumbing system. Simple tasks such as fixing the leaky faucet or replacement of your toilet gaskets can easily be done.

However,  there are more complicated tasks that you should always leave to the experts like pipe replacement and repair.  Below are some tips on how you can avoid these..

How to Avoid Costly Pipe Repairs

Costly plumbing repair service can also be prevented if these easy tasks are performed:

  • Check for leaks – Unmanageable flooding is sometimes caused by leaks because even the smallest leak in your pipes and faucets can cause this. The damage incurred through this require substantial plumbing repair and yes it is oftentimes costly. It is therefore important to check unheated basements, crawl spaces, garages and exterior walls, basically all areas that lack insulation.This is because little to no insulation often leaves pipes vulnerable to elements that make them crack and leak. If you cannot do the checking yourself, contact a residential plumber to help you check trouble areas and provide an overview on how to prepare as well as to maintain your plumbing system in the coming winter months.
  • Weatherproof possible trouble areas – It is always essential to look out for possible trouble areas, normally those with exposed plumbing. Windows, doorways, and vent fans should be checked to ensure that their seals remain tight.Otherwise one can fix up with caulking to prevent your home pipes from freezing. Ensure that cracked windows are repaired because as they can lead to freezing temperatures that would cost you expensive plumbing costs.
  • Insulate exposed pipes – Sealing off all airflow inside your home could lead to mold growth overtime. To avoid this, you can have your pipes properly insulated for them to stand up against cold winter air.This easy and inexpensive procedure is the best way to go. You can try installing foam tubing or wrap towels around your pipes to help the water heater retain heat. The pipes near electrical sources are vulnerable and should be insulated with electrical heating tape. Wrap it around the pipes to provide enough heat and keep the pipes from freezing.
  • Drain and insulate – Outdoor faucets and pipes have to be drained and insulated before the winter season to ensure that the water inside the pipes won’t freeze and expand. This is what’s causing the pipes to crack and burst. Secure the exterior pipes to avoid property damages and costly plumbing repairs.
  • Keep interior pipes warm – Do not forget that even indoor pipes are affected by the winter season. They can also freeze in cold weather. In order for them to not freeze, open your cabinet doors to expose them to heat.If you won’t be home for quite some time, set your thermostat to a minimum of 55 degrees Fahrenheit. You can also let your indoor faucet drip steadily to prevent pipes from bursting.
  • Have a licensed Chicago plumber maintain your pipes for you – Your plumbing system plays a major role in your home hence it needs the best care. Costly repairs can be avoided if the pipes have been properly installed and maintained from the very start.

Burst Pipes in Your Chicago Home? 

burst pipe repair TennesseeThere are two most common causes of broken pipes: water pressure and freezing.

For now..

Let’s talk about water pressure buildup and what you can do to prevent it.

Too much water pressure in your pipes can cause leaks and burst pipes. But how do you know if the water pressure is too high?

If you notice banging noises coming from your pipes, have a running toilet, or if you are experiencing frequent issues with your plumbing appliances, you probably have excessive water pressure in your plumbing system.

To prevent this from happening, have a water pressure regulator installed by a plumbing contractor in Illinois.

Understanding the causes of burst pipes can help you fix issues when they are still manageable and prevent them from occurring. However, once a water pipe in your home bursts, you don’t have much of a choice.

This can cause damage and inconvenience.  It can be costly to repair when not addressed immediately, so the best thing you can do is to have it repaired by our expert professionals right away.

Why You Need To Have Burst Pipes Repaired As Soon As Possible

A cracked pipe that is about to burst is like a ticking time bomb. It can break anytime and cause costly damages, so immediate action is needed. It is always a good idea to fix a damaged pipe as soon as you find them.

A pipe leak, even a small one can cause damages to your home if left undetected. Here are some of the adverse effects of a pipe leak or a burst pipe:

  • Indoor flooding
  • Mold and mildew
  • Water damage
  • Structural Damage

Never let a broken pipe, or a leak get out of hand before calling an expert. While some minor issues are easy to fix, water leaks and burst pipes need immediate professional attention. Make sure to detect cracks and leaks and ensure that proper repairs are carried out. 

Let the Experts at Plumbers 911 Chicago Fix Any Broken Pipes In Your Home

When you call us for help, here are the great things you can expect from us:

  • We offer speedy customer service
  • Technicians will arrive at your doorstep within the hour of your call, guaranteed.
  • Our emergency services are available any time of the day (and night)
  • We only have licensed, fully insured and bonded plumbing specialists
  • All our experts are well-trained and experienced in the industry
  • We offer reliable services that are not overpriced

 

 

Posted on: February 12, 2019

Top 6 Residential Plumbing Care Tips for Boston Homeowners

Boston plumbersMost people take their plumbing system in Boston for granted. It may work fine today, but the next day, something could go wrong. If not properly maintained and promptly fixed, leaks or broken taps can become worse overtime. 
 
The problem gets bigger when we don’t pay attention to things. Sure, it may seem like a small faucet or a few drops of water here and there. But the real concern is: How much water is it wasting? How much money is thrown away?
 
Plumbing problems, big or small need immediate attention. That’s a fact. As a homeowner, it is also important to know beforehand what to do in case of a plumbing emergency. 
 
Do you know where your home’s water shut-off valve is located? Do you know who to call for help? Do you have basic plumbing tools in case you have to make temporary repairs?
 
Let us help you tick one off your to-do list. When you need an emergency plumber in Boston, call us! We have the best technicians in the area, and you can be sure that our services are of high-quality and reasonably priced.
 
We’ve been recommended by hundreds of residents all throughout the Massachusetts, even in you search for Boston plumber in Yelp. Our professional contractors respect your time and property. From plumbing fixtures to heating maintenance, we’ve got you covered.
 
First, let’s talk about garbage disposals.
 
There is no denying how useful it can be in a kitchen. While it is not completely necessary, this kitchen appliance simply makes cooking and cleaning up less of a hassle.
 
Unfortunately, despite how often the garbage disposal is used, it is one aspect of a kitchen that is often overlooked and dismissed. A broken disposal unit can cause a block in the drainage system which needless to say can be a costly affair.

#1 – What NOT To Put In Your Garbage Disposal

Below are just three tips to maintain and keep a garbage disposal system in tip-top shape.

1. Run the garbage disposal unit regularly. It is important to regularly use the garbage disposal unit. Turning on the system a few times a day can assure that rust does not build up along the blades of the system. Moreover, running the unit regularly prevents waste from accumulating and building up.

jammed garbage disposal in Boston2. Refrain from putting non-biodegradable food into the garbage disposal unit. It is understandable how tempting it is to shove all kinds of garbage into a garbage disposal unit. Not only does it save time, but tossing trash into the unit requires no trash bags and damp paper towels. Unfortunately, a typical garbage disposal system is simply not made to handle non-food materials. Grinding up glass materials, plastic bottles, scrap paper, cigarette butts and grease can cause damage to the garbage disposal unit’s blade and motor.

3. Keep the garbage disposal unit clean. Quite possibly the simplest way to keep a garbage disposal system from breaking down is to clean it every after use if possible. Running the garbage disposal system after pouring a few drops of soap through cold water is a sure-fire way to maintain a perfectly running garbage disposal system.

We can connect you with a 24 hour plumber in MA to work on your plumbing appliances. Check out our service areas, select your city and call us to schedule a service.

Let’s move on to #2, another part of your home that’s mostly taken for granted.. the septic tank!

 #2 – What are the Common Problems in Sump Pumps?

Poor maintenance. A sump pump’s condition should be checked quarterly. Otherwise, you will be put through a great ordeal.

A faulty switch is one of the simplest yet equally annoying mechanical issues with sump pumps. To be safe, clean, adjust, and test your unit on a regular basis to check for problems.

A discharge pipe that is blocked or frozen over will result in a damaging backflow when left unrepaired. A grate will prevent clogs. However, since preventing pipes from freezing has never been realistic, it would be better to install an alternate emergency discharge line as back-up.

Installation fails. The absence of a check valve on the discharge pipe, which can result in water backflow. This will have a domino effect of causing your impeller to have a backward rotation that, in turn, loosens the motor shaft. Your unit may seem to function when it really doesn’t.

Failure to drill an air pressure-relief hole in the discharge pipe, specifically in the middle of the check valve and the pump. The absence of this hole results in the overwhelming build-up of air pressure, which forces your unit to exert itself more than it should. This places a toll on its performance and shortens its lifespan.

Old age. In general, a sump pump has a lifespan of seven to ten years. If your unit is nearing its end, symptoms of old age will start appearing. Once they do, make sure to have it assessed by one of our Boston professionals to see if an immediate replacement is necessary.

Loss of power. Really bad storms and lightning usually results in power outages, rendering your sump pump ineffective. To spare your basement from flooding, purchase and install a backup generator to keep your sump pump up and running as needed.

These two plumbing systems are mostly taken for granted because they’re not seen often, so ensure that you get them regularly checked by calling us today! Ditch the thought of calling a Boston budget plumbing company. We have local Boston plumbers that have over 10,000 hours of training and experience — we already know all plumbing problems and solutions!

Now, let’s talk about something that we use on almost a daily basis, #4: the water heater.

Let’s say you just got a new water heater installed…

You decide to jump in quickly to try it, but to your dismay the water is frigid cold. What might be the problem?

Before you snatch up that phone for a refund, you first need to know that these are common problems and they can be fixed.

#3 – Why Isn’t My Water Heater Working?

Here are some common problems you might encounter with your water heater.

Water is cold
If your water heater runs by electricity, and it is not bringing you hot water after being turned on for some time, the problem may be with the water heating component. Try to check if this is the problem and replace it with a new one.

Another problem may be the thermostat, which is the monitoring device. Water that’s too hot or too cold can be the result of this problem.

Boston Water Heater Installation ServicesLeaking water
This is a common problem for water heaters, when water leaks either from the tip or from the bottom of the appliance. Leaks can be caused by a number of various problems like corrosion.

When water sits in the tubes for long periods, sediment and rust builds up. Eventually, these elements create cracks inside the tubes and the tank itself.

There’s not enough water
Another big problem you might encounter is there is not enough water. When this happens, it’s usually the thermostat that has a problem. Check if the device is properly working and consider the actual temperature of the water to what you can see on the gauge.

A clogged vent can also be the cause of the problem. It may change the normal flow of water from the tubing.

Rusty water
Rusty colored water is usually the cause of a dissolved anode rod. An anode rod is the component of the heater that attracts corrosive elements in the water.

If it is defective, it often emits a sulphuric smell caused by rusting and degradation of the metal. If this is the problem, it might be time to change the anode of the water heater.

Eerie and popping noises
When there is an eerie sound emitting from the water heater, it usually is caused by buildup of sediments inside the tank. Remove the sediments by flushing them out and filling the tank with new clean water.

How Will I Know if My Water Heater Needs Replacement?

  • Listen to clanking or banging noises, which are signs of aging. Typically upon purchase, a residential water heater comes with a five to ten-year warranty. Unless you have made use of it sparingly over the years, it is advisable that you have your water heater replaced after the specified warranty period.
  • Check for leaks. Beware! A water heater tank that leaks is a potentially major headache. Calling us ASAP for assessment will save your walls, flooring, furniture, and the water heater unit itself. Depending on where the leak is coming from, a professional can assist you in determining whether your unit requires minor repairs or replacement.
  • Check if the water produced is hot enough or not. If the heating element and thermostat are not the culprits behind the heating failure, then call our licensed Boston experts to troubleshoot your unit. Expert advice is sounder than speculation.If your unit fails to heat water altogether, it’s an indication of repair or replacement, which our skilled and experienced technicians can make an informed decision on. Consider your hot water usage. Relative to your unit’s age, usage is a big factor in its performance. Even when still far from the end of its warranty period, your unit may suffer from premature aging due to the following:
  • You have a big or growing family. Your area of residence provides only hard water, which results in a buildup of minerals within the tank. This results in a plumbing line obstruction that inhibits your unit’s performance and decreases its life span. If your unit has served its maximum performance to your family in terms of usage, then perhaps it’s high time to let it retire and find a replacement.

Now for the good stuff: DIY Plumbing with #5 –Your toilet!

If you’re in a situation where the water in your toilet just won’t go down. It might be a headache to watch those things float in the water. But do not worry; here are some DIYs for a clogged toilet.

#4- How Do I Unclog My Toilet?

running toilet problem BostonDIY Method #1. The Plunger
Most clogged toilets just need one special tool – the plunger. A good plunger would have an extension flange on the rubber bell-shaped end. It is created to fit toilets better so you can convey more potency to the plunge.

A poor flush means that your toilet drain is completely plugged and does not drain. A slow drain means that flushed water somewhat fills the bowl but does not clean the waste away. The water level remains high, but normally drains after a couple of minutes.

DIY Method #2. Drain Snake
A drain snake is a long wire coil with a corkscrew-like tip that you lodge into the pipe until it comes into contact with the clog. You then turn the snake clockwise so the head of the wire screws through the clog and disjoints it. Or the rubble winds onto the wire so you can dislodge the clog.

DIY Method #3. Vacuum
You can use a wet and dry vacuum to dislodge anything that is causing the clog. You can also use the vacuum to empty water out of the bowl. Put a piece of cloth or an old towel down to seal around the drain.

Turning on the vacuum and trying to suction the clog can be effective for anything hard that was dropped in the toilet bowl.

DIY Method #4. Dishwashing Liquid and Hot Water
You can squirt a small amount of dishwashing liquid in the bowl, and then pour a pot of hot water in the bowl. Let the mixture sit for a couple of minutes before attempting to flush.

The dishwashing liquid will ease out the waste clogging the drain and hot water will soften the clogged matter. This will make it easy for you to flush the toilet once everything settles in.

DIY Method #5. Baking Soda and Vinegar
Baking soda and vinegar can be effective in dislodging anything that clogs a toilet. A cup of baking soda, a cup of white vinegar, and a kettle of hot water poured into the bowl will work instantly to flush the toilet clean.

Then, #6 — Your drains..

If you’ve been standing there waiting for the drain to flush the water out but it’s taking far too long.

This is an initial sign that the toilet or sink could be facing a clogged drain. Basically, if you are cautious of what goes down on your drains, you really shouldn’t clean and clear them of debris recurrently.

The following maintenance is needed to prevent a clogged drain that can be a problem in the future. Some can be done once a week and some about once a month.

#5- How Do You Keep Drains Clog Free?

Once a week maintenance tips:
Bring the pop-up stoppers up in the bathroom sink to get rid of trapped debris, put in in the trash and wash the stopper and put it back in the drain.

Take out the drain cover from the shower of the bathtub drain and use a bent wire or hair catching brush to remove debris that might have collected there.

Drain Cleaning BostonOnce a month maintenance tips:
Clean and clear your waste disposal with a stiff disposer brush or mix a few cups of ice and table salt. This will help remove grease buildup and slime off the sides of the disposer. Flush it with cold water added with lemon to deodorize.

For bathtub maintenance, pull out the overflow plate, and bring the pop-up handle up to grasp the rocker arm. Get rid of accumulated debris and wash thoroughly before setting it back.

It is also advisable to use a good cleaner to protect all the drains in your home. A good cleaner has to be non-corrosive and biodegradable so it won’t deteriorate your home plumbing system. It is better to use a nature friendly cleaner than chemical ones as it can be safe to your plumbing system and your family. Drain cleaning in Boston is one of our expertise, call us for help!

To clean your drains effectively, you can use baking soda and vinegar. This is a great way to help eliminate a slow-moving drain.

To unclog a drain with baking soda and vinegar, use the following tips

1. Let a pot of boiling water run down through the drain.
2. Throw in about half a cup of baking soda. Let it sit for a couple of minutes.
3. Then, pour in a mixture of a cup of vinegar and a cup of hot water.
4. Cover the drain with the plug and let it sit for 5-10 mins.
5. Flush with boiling water.

Lastly and the most basic: Faucet installation.

#6 – How Do I Install a Faucet?

Step 1. Inspect the openings.
Probe the sink for openings and their distance together. Bathroom faucets, in particular, have two handles that may be connected to the spout to form a single unit, or they may be set up apart. This information will be helpful for proper faucet installation or replacement.

Step 2. Turn off the water supply.
There are generally two valves for water supply, one for hot water and another for cold. Turn them off by twisting the valves clockwise to stop water from running in the tubes.

Step 3. Put the faucet replacement in position.

For proper faucet installation:

– Start by positioning the gasket and the faucet on the sink.
– From beneath the sink, thread the mounting nuts into the shanks. Make sure that the flat, wide side part of the mounting nut is up.
– Screw the mounting nuts tight but not too tight to damage it or make it difficult for future replacements.

Step 4. Connect the water supply.
Water is typically supplied by the water-supply tubes. To connect it properly, make sure you take note of the following steps.
Cover the threads of the water supply valve with plumbers tape.
Thread the nut into the shut-off valve and secure with a wrench.
Wrap the faucet shanks threads with plumbers tape and thread the water supply nut against the faucet shanks.
Secure the nut with a wrench.

Step 5. Clean the faucet by flushing.
Make sure that the water supply is clean by running water into the faucet to flush trapped debris off of it. Trapped debris can impair the sealing surfaces inside the faucet and trigger leaks.
Open the water supply valves beneath the sink.
Let water run for 15 seconds to remove residues and trapped particles off the tube.

We’ve covered a whole lot of topics in this blog post, and we hope that you now which one will save you loads of dollars in the end?

However, the decision will always be up to you. Just remember to contact us for any of your plumbing repairs, big or small, because we have licensed, insured and certified Boston contractors on standby, 24/7.

Watch the video below to see why you need to eliminate sub-standard plumbing services and only hire reliable plumbing experts in Boston.

Posted on: October 18, 2018

8 Signs of Residential Plumbing Problems in Kansas You Can’t Ignore

Residential Plumbing in Kansas CityOne of the most important parts in our household is the plumbing system. Why? Simply because this controls the flow of water in our home. Whether we run water from the tap or flush it down the drain, every plumbing part is placed systematically by professional plumbers to work properly.

Water, as we all know is very important to every individual. In other words, we cannot function well without it. So, we have faucets and showers where we get water for washing, cleaning and drinking. We have toilets to do our daily rituals. These plumbing fixtures are beneficial and it helps us use water accessibly.

Why is it Important to Find Out and Fix the Plumbing Problems in Your Residence?

However, if we neglect to care for our plumbing system properly and overlook small issues, then we are in for a big surprise (not in a good way though!). That’s why plumbing maintenance is imperative. 

It is a good way to know if everything is working perfectly. You can hire licensed plumbers to have a regular check-up or you can also DIY your plumbing issues if you think you are capable enough.

If you fail to maintain or fix any plumbing problems in your home, then chances are you’ll end up paying for more because the damage will worsen overtime. Say for example, a faulty tap may waste a lot of water because of a leak. Every drip adds up. Bear in mind that it only takes 4,000 drips to make one litre of water and that’s wasted water AND money.  Plus, it will eventually worsen as time goes by. 

Some plumbing issues may eventually lead to damaging other plumbing components. Then again, more money to spend. On top of that, it is also possible that other problems may pose a threat to your family’s health and we wouldn’t want that.

In This Article, We Will Be Covering:

  • 8 Signs of Residential Plumbing Problems
  • The Importance of Plumbing Maintenance
  • How to DIY Small Plumbing Repairs
  • How to Maintain Your Plumbing System
  • How to Find The Right Plumbing Contractors

8 Dreadful Signs That Tell You Need to Hire a Kansas Residential Plumbing Expert

Plumbing issues are one of the things we tend to ignore until it’s too late. MostKansas Residential Plumbing people know the basics in troubleshooting such as using a plunger for toilets and applying baking soda plus vinegar for clogged drains. 

However, plumbing problems do not end there. There are things that we (regular people) cannot do-it-ourselves when it comes to more intricate issues.

That’s why these are best not to be ignored. Aside from that, you might go through the trouble of the mess it will bring you and you might also have to shell out a BIGGER amount of money for the repairs of the damage that you didn’t pay attention to.

Say for example, a simple blocked pipe line might start a leak overtime and may lead into bursting pipes in the long run since it was ignored. That would have been an inexpensive plumbing repair if the problem was addressed the earliest time compared to replacing your entire pipeline and also the damage it may cause. 

Read on to find out more about these important signs that you should NOT ignore:

  • Gurgling Sound – If you hear some gurgling sounds whenever you use your toilet,  washing machine or your dishwasher, this might be your first indication that you have a clogged drain.

    When you hear some gurgling sounds even if you are not using your toilet, this is a sign that air is finding its way out through your system and you are most likely to have a backup or overflowing toilet.It’s quite the same thing when you are taking a shower, using the washing machine or using your dishwasher.If you hear some gurgling sounds when using them, you need to stop and observe first before having back up problems and call a trained technician.

  • Running Toilet If you hear water running in your toilet chances are, you have a leak. Fortunately, there are ways to check or locate where the leak is coming from. First, check the plunger by flushing your toilet and make sure that the plunger is properly back in to its place after flushing your toilet.

    If there is still running water, check the float arm inside the tank if it’s properly adjusted.  When water is full it’s supposed to shut off your fill valve. Check if the switch automatically shuts off when the float arm is completely raised.After doing these things and you still hear running water, then you might as well check the flapper.Check if it still works or maybe it needs replacement already.

    This is actually very easy to do. Get a dye or any food coloring and simply add a few drops into the toilet tank (but first make sure that the water in the toilet is clean!)You’ll see the results in just a few seconds.If your flapper is really the culprit, meaning it’s already damaged and it needs to be replaced, then you’ll see the food colouring coming out mixing with the clean water in your toilet.That means you flapper is worn out and you need to replace it ASAP because this will waste a lot of water and later on you will regret paying for a high water bill.

    However, if you are unfamiliar with your toilet tank’s components, it’s best to call in a licensed tech to get the job done.

  • Leaking Pipes If you hear hissing sounds even if nobody is using the toilet or kitchen or perhaps you see some discoloration on your walls, floors or ceilings, then you most probably have a leak coming from your pipes.

    If you really want to be sure that you have a leak, that is easy to determine. Just turn off all faucets and showers in your home. Be sure that  nobody is using the bathroom or kitchen.Then check your water meter if it is still spinning.If so, then you definitely have a leak. Now, locating where the leak is coming from is another story.Leak detection is a plumber’s specialty.  Licensed techs have state of the art tools and equipment to determine where a leak is coming from without causing any damage to your property.  

  • Weak Water Pressure – In most cases, the weakening of water pressure from your kitchen and bathroom taps is because of gunk or scum build up overtime in your faucet’s aerator. 

This is actually very easy to do. You just have to unscrew the aerator from the faucet and brush off the residue with soap and water. When it’s already clean, just screw it back onto the faucet tightly.

However, if this does not change the water pressure coming from your faucet, then the problem may be coming from leaking pipes or clogged water lines. We recommend hiring a certified plumber to address the issue.

  • Water Drains Slow If in case you notice your kitchen or bathroom sinks drain a little too slow than usual, your drains may be clogged. Using mild drain solutions or vinegar with baking soda will probably do the trick.If you follow it up by shoving a plunger onto to the drains, it might suck up the clog or flush it down if it is easy to remove.

That said, if the blockage won’t budge, you might want to consider using a snake drain. However, there is always risk of damaging your drain pipes if they are corroded or brittle already. So, be extra careful when doing this because you might end up spending more for just a simple job.

  • Frozen Pipes – This is something that you surely don’t want to ignore. If your pipes get frozen during the winter, you need to call a 24/7 emergency plumber immediately.Some signs of frozen pipes are: water not running through your pipes anymore, weird gurgling noises once you turn on your faucet or ice on your pipes.

    Never try to thaw the pipes by yourself because this can lead to more damage. This can crack or even burst your pipes if you try to defrost them yourself.To prevent your pipes from freezing, let your taps drip cold water if possible overnight when the temperature drops below freezing, then leave your sink cabinets open to be exposed to warm air.

  • Sewage OdorIf you notice a pungent smell or a really disgusting sewer odor, chances are you have a damaged sewer line or a broken vent. If you have any broken sewer pipes or vents, this could actually be a threat not only to the environment but of course to your family’s health as well.

    It is strongly recommended to contact a certified contractor to address this issue and prevent it from getting worse. Otherwise, you will surely face the consequences later on and it’s going to cause you more $$$. In case you smell something odd that is coming from your sewer lines, act fast and do not ignore.

  • Gas Leak – If in case you smell gas, whether you’re in the kitchen or using your dryer, then you probably have a gas leak.  This is not an issue that you can take for granted since this could be fatal. Your family’s health and life is at risk.

This is a serious matter since you are talking about life and death. Immediately call a gas system professional to address the problem. Remember not to turn on any of your appliances because this could start a spark and will ignite the gas to explode.

Open your windows or doors to release the gas odor from your house while waiting for the professional gas techs to check and fix the problem. 

Residential Plumbing Service in Missouri

Additional Tip: 

You can check the pressure in your house. As much as possible, avoid adding too much stress in your plumbing system and ensure that your water pressure is always at a level that is safe. 

Just check your water pressure by using a gauge. You need to see if the water pressure is too high. If so, you need to repair or probably replace the pressure regulator to ensure that the pressure is in a safe level.

What are Some Vital Guidelines on Plumbing Maintenance?

Proper maintenance is the key to having a good plumbing system in your home.
It is vital to have clean water that flows in and to be able to flush waste out of your home safely.

Drain Trap Repair in Kansas CityThere are a lot of issues that may happen to your pipes, drains, toilets, water heaters and so much more. Leaks in your sink drains for instance, or leaks from your water heaters can be more than just a nuisance. More often than not, they cause mold to grow and structural damage if not fixed immediately.

However, most people tend to disregard small plumbing problems until they become big and serious.

By then, you are left with a possible electrical issues, wood or concrete damage and definitely a huge plumbing problem. On top of that, you still have a huge bill that you have to pay.   These adversities can be avoided if you don’t neglect having proper plumbing maintenance. Remember that by maintaining your plumbing, you can easily identify minor problems and you can resolve it immediately. 

Bathroom:

  • Fix Broken Taps – Immediately fix leaking taps or showers either in your bathroom or kitchen. Although, it may seem insignificant at first, but it will eventually be costly if the damage worsens. Consider also the amount of water wasted if you neglect this for a long time.  Bottomline — while it’s still small, fix it!
  • Declog Your Drains – Hair, soap residue, or any debris that goes down the sink and tub drains will eventually accumulate and will be the cause of blockage. It’s easy to clear out unwanted elements in your drain when it’s still early. You need to do this every few months or when you notice that water slowly goes down the drain.
  • Clear Your Faucet Aerators – Overtime, calcium builds up in your faucet aerator and this can definitely obstruct water flow. You will notice that your water pressure weakens in your faucet or shower — that means, there may already be some calcium build up. Cleaning your aerators regularly by removing them will ensure free flowing water.
  • Repair Any Running Toilets – Checking your toilet on a regular basis will help you discover small problems. Particularly, when you have a running toilet. Overtime, parts of your toilet may wear down and can cause problems.If you notice that your toilet is running even if it is not flushed, there are a few things to consider. Your flapper might need replacement, your fill valve might be defective and it isn’t stopping water from filling or your float arm might not be well adjusted.

Kitchen:

  • Fix Your Sink Leaks – Kitchen sinks are often used in households which can be the cause of leaks coming from taps, sink drains or garbage disposal or any other sink accessories. You have to thoroughly examine your kitchen sink for any leaks or any signs of damage regularly to avoid huge problems in the future.
  • Examine Your Garbage Disposal – More often than not, garbage disposals can be the cause of leaks if it goes unnoticed. You need to check your unit for any signs of problems. Of course, you have to do it with caution or better yet check the recommendations of your manufacturer on how to maintain your unit to be safe.
  • Clean Your Sink Drain – Constantly keep your kitchen sink drain clean by applying natural drain cleaners. If you can use brushes that can reach deep in your drain, the better. It is imperative you keep your drains free from any residues or build-up to keep the water going down the drain fast. 

Water Heater:

  • Settings – You need to set your water heater in an optimal performance. Remember that your water heater works double during the months that are cold, so proper maintenance is the key to prolonging your water heater’s life. Set your water heater at 120 Fahrenheit if you are looking for a top quality performance.  
  • Flush Out – Sediments in your water heater when accumulated can cause corrosion overtime. This reduces your water heater’s efficiency and it will definitely lessen its lifespan. Corrosion can also cause leaks in the long run since it can eat up steel and it will eventually find it’s way out.
  • Test Pressure – Testing the water heater’s pressure must be done with extreme caution. Just release the water heater’s valve by lifting its lever and let it flick back.You’ll notice a burst of hot water through the drain pipe and this indicates that it is working properly. Remember, If your water heater is already five years or older, we suggest that you contact a professional plumber to prevent accidents.

Septic Tank / Sewer:

  • Inspect Regularly – A sewer stoppage or main line blockage is absolutely a huge problem. So, it is better to avoid rather than to go through the problem especially if it worsens. You always have to maintain your septic tank system. You need to have this inspected regularly by a professional if not by you to see if it’s about to overflow already.
  • Septic Tank Pumping – Pumping your septic tank regularly is the most important part of maintaining. This will definitely clean your septic tank and get rid of the water waste and unwanted bacteria in your tank.This can also eliminate or minimize odor (if there is) that comes out through your toilet or drains. However, the schedule of septic tank pumping depends on the size of the septic tank and the frequency of usage.
  • Check Sewer Line – Maintaining your mainline regularly will prevent it from stoppages.You have to be sure that your sewer line is properly working and how frequent stoppages occur.Homes that have trees by their yards may have tree roots that can cause repeating sewer issues. It’s best to schedule a service to snake your sewer for preventative check-up. Watch out for the signs of sewer blockages before it worsens.
    find a local plumber in Chicago to save water

Contact Our Kansas Plumbing Professionals Now!

For your plumbing concerns, contact our local technicians. No matter how small the issue is, you’ll never know if this requires immediate attention. Don’t wait until it’s too late.

You wouldn’t want to be spending a lot of money for huge damages when it could have been only a preventative check-up or a minor plumbing problem that could be fixed with a very reasonable price. 

Residential Plumbing Reviews in Missouri

Why People in Kansas City Prefer Our Services for Their Residential Plumbing Issues

People want to get their money’s worth when shelling out, especially when they have something that they need to get fixed immediately. We always think of our clients’ satisfaction and we make sure that is accomplished every time we visit a home for service and repairs.

Why is that? Because we wouldn’t want to hire somebody that would just make matters worse if we were in our clients’ situation. 

We at Plumbers 911 pride ourselves in taking everything seriously! Solving your plumbing problems is definitely our primary concern. Our team will surely solve all your plumbing problems whether it’s big or small. Bear in mind that we’ve got you covered!

Backed by our multiple years of experience and 10,000 hours of intensive plumbing training, we will deliver quality service for every task that we will handle. All our plumbing contractors are bonded, licensed and insured so you have nothing to worry about. With our top of the line plumbing tools and high-end equipment, our plumbers will get the job done fast and efficiently.

Stop worrying and leave it to us. We will surely flush your plumbing problems down the drain. So, the next time you need a plumbing help for your residential plumbing problem in Kansas City, you only need to call Plumbers 911, where emergency plumbing service is just one click away!

Watch the Video Below on Residential Plumbing

Posted on: September 26, 2018

7 Signs That Tell You Need Drain Cleaning Done By Our Licensed Plumbers in Chicago

Signals of Clogged Drains You Need to Watch Out For

clogged drains chicagoDrains are one of the most important components of your home that people often taken for granted.

We wouldn’t know how vital they are until we encounter a problem.   A clogged drainage system is one major problem that can give you much headache and inconvenience.

The drains inside your house basically convey the sewage and other wastes materials and remove them for disposal.   Although they can be reliable structures and can function at optimum levels for a long time, your house drains can be susceptible to wear and tear of everyday use. 

Contact Our Chicago Plumbing Professionals Immediately

A clogged drain is a serious problem that requires immediate attention from our local technicians.  When the problem happens, it restricts the normal function of the pipe, leaving water and waste trapped in the system.

As a result, trapped debris can potentially back up into your home leaving a pungent smell and usually dirty waters.  If this occurs, you should immediately stop using your plumbing system and call us look at the problem.

In This Article, we will be covering:

  • The importance of drains in your home
  • How serious drain clogs are
  • What causes clogged drains
  • Top 7 signs that your drains need to be cleaned
  • DIY options to drain cleaning
  • Tools you can use to clear drains
  • How to unclog a drain pipe
  • How to clear drain blockage
  • Home remedies for clogged bathtub drains
  • How to prevent clogged drains
  • Should I DIY or call the professionals for drain cleaning pros and cons
  • Knowing when to call professional plumbers for the job
  • Clogged drain services we can offer
  • What is video sewer inspection
  • Drain and sewer cleaning services
  • Why plumbers use cameras for sewer inspection
  • Camera inspections for locating off grade pipes and cracks
  • Understanding root intrusions

A defective drainage pipe is something that has to be done by the pros as a self-remedy would often lead to more complications. Also, DIY treatments and looking for simple instruction guides on the net does not equip you with the effective means to get rid of what is causing the obstruction and can often worsen the situation.

Do Your Drains Need to Be Cleaned?

A lot of people usually think that they only need drain cleaning when the impediment completely forms in the line. Most often this is not the only case as there are a lot of warning signs that can indicate you need to have the outlet cleaned. When some manifestations of the problem occur, the quicker you act by giving us a call, the more time and energy you’ll save.

What are the Top 7 Signs I Should Look Out for When My Drains Get Clogged?


Bad Stench

Waste can stick to the walls of the pipe and may develop a bad smell over time. When your drains are clogged, it cannot draw in ventilation because of water blocking the pathway and causes the smell to recoil back inside your house. Kitchen sink pipes and bathroom drains are especially vulnerable to this problem because of the variety of wastes that accumulates in them. If you notice a bad smell coming from them, you should immediately schedule a drain cleaning services to stop the problem from developing any further.

Gurgling Sounds
A gurgling sound is often an indication that there is an impending problem with the drain. When water descends from the pipe, it causes oxygen to bubble up and make the sound. Complications from this sign can be eliminated when you give us a call.

Slow Drainage
As dirt and waste materials like soap, grease, and hair attach themselves on the walls of the drain pipes, over time, they accumulate and restrict the flow of water. This leads to water languidly coming out of the pipe and not with the intended flow. If you observe that the duct drains more and more slowly, it is a sign that it needs cleaning. If you call one of our professional Chicago plumbing contractors, you will more likely be able to prevent the buildup of hard to loosen substances.

Recurrent Clogs
Often, most homeowners try to find their own solution to the problem with readymade chemicals in the market. If the junk is not removed properly and water is not able to flow freely, it can result to standing water and can cause permanent damage to the pipes.

If your sink frequently experiences clogging, it can be a sign that we might need to check the problem. Recurrent clogs can indicate a heavy buildup of sediments and other materials which prevents water from flowing.

What Home Remedies Can I Use for Clogged Drains?

With chemical and non-chemical cleaners in the market today, it’s usually your decision what to use. 

Some people opt to use tools, while others rely on natural ingredients.  All we can say is.. you have to be careful and think before you pour different solutions down the drain.

Commercial Cleaners
(Warning: Do this at your own risk!) The first is commercial drain cleaners. These are dangerous chemicals that can be purchased at the store. Pure poison these work by eating away and dissolving hair and particles. The corrosive power of these chemicals does not stop with clogs alone. It can eat away at the pipe itself is used incorrectly and depending on the material of your pipe. The caustic nature of these chemicals is also dangerous for your health so use with great caution or avoid altogether.


DeClogging Tools
The most common cause of clogged drains in the bathroom and bathtub is hair. Particularly long hair.  Products that feature a thin and flexible piece of plastic with barbed sides, generally sold for $2 and up. These tools are wonderful because they fit right into the bathroom and bathtub sink, grab the hair and hair ties, and pull them right out

Another cheap tool is the “snake” and comes in different shapes for different needs. Each is around 5 dollars and can be compared to a pipe cleaner in flexibility with a handle at the end.

Note that you can make your own tools. For example, you can take a metal coat hanger, straighten it out, and make a hook on the end to grab the gunk. Videos on YouTube are quite helpful and learning how to unscrew sink and bathtub stoppers to reach clogs more easily. Remember to pull the gunk out, not push it through. Pushing it further down the drain will just lead to a deeper clog.

Homemade Cleaning Solutions
After using a tool to remove the hair and debris you can use a homemade drain cleaner to remove any remaining buildup.  The great thing is, most of these ingredients could be found in your kitchen!

To create your homemade drain cleaner, pour one cup of baking soda and one cup of vinegar into the drain, close the stopper, and allow it to bubble and sit for 30 minutes without use.

After half an hour, pour hot water down the drain to rinse it through. You may need to repeat this a couple times for drains with a bigger build-up. This homemade cleaner both deodorizes and cleans for a fresh, well working sink.
If you’re out of baking soda, you can also use the salt and cream of tartar solution.

Mix 1/2 cup of salt, half a cup of baking soda and about 1/4 cup cream of tartar in a bowl.  Pour this solution down your drain and then add a gallon of boiling water.  This allows the debris to break up.

Live Culture
Another alternative is to use live cultures of enzymes/bacteria to work through organic muck blocking your drain. Companies such as Earth Enzymes and Biokleen seem to have a lot of customers. If none of these steps has helped eliminate your clog, it is time to call us immediately.

After you have put in all this effort to clear your drain, take steps to keep it this way. Prevention is better than the treatment they say. Avoid brushing long hair over the sink and use your clog clearing tool, or cleaner once a month to clear any clogs starting to form.

Chemical Cleaners Can Make Matters Worse, Only Our Chicago Plumbing Contractors Can Do the Job Effectively

Clogged drain repair ChicagoWhile they are readily available in the market, chemical cleaners do more harm than good.

They are not only harmful to your health but could make the clog worse. Chemicals can accumulate atop of the clog and potentially corrode the pipes.

This becomes an additional problem as you will be spending more than providing solution to your existing problem.

These also produce unhealthy fumes and can burn your skin. They can be especially harmful to your children and can lead to other health problems as well.  Getting the help of our licensed pros will save you the effort and often time consuming process of having to clear your drains from any clogs.

Also, as the obstruction from your drains is not visible, it can be hard to diagnose what really is causing the blockade. Improper use of tools and chemicals can sometimes be much more damaging.  If you are do not have the right equipment or possess the right knowledge, getting the help of our specialists can be much better.

Should I Just DIY or Go With Professional Drain Cleaning?

unclogging drains chicagoAlthough there may be a lot of handy people who can attempt to fix some problems inside their homes, the plumbing system inside your home is as complicated as it gets.

It should be left alone to the experts (like us) who can effectively provide solution to the problem.

Hiring us can help avoid costly mistakes because we possess adequate know-how and skills required to fix every aspect of your plumbing system.

Additionally, plumbing repairs and replacements can be unsafe most especially if it involves working with the complex network of your drains and can include unhealthy gases.

Are Your Drains Constantly Clogging?

The drains responsible for wastewater removal may easily become clogged due to hair, grease, food, toys, debris, and residual buildup. Frequently, techniques such as snaking and drain cleaning formulas are used in an attempt to address the problem.

To Recap, Here are Some Symptoms of Clogged Drains:

  • Backed up sinks
  • Slow draining sinks
  • Bubbling toilet when you turn on your sink
  • Gurgling from tub when dishwasher or washer used
  • Unpleasant odors coming from the drain
  • Toilet starts to overflow when flushed

When you are faced with a clogged drain, we strongly recommend NOT to reach for a drain cleaner as your first line of defense. These solutions use high concentrations of dangerous chemicals. If your drain is completely clogged, this chemical stew will sit in your pipes, corroding them and posing a health hazard for both you and the technicians who come to your aid.

If your clog is a minor when, a non-toxic drain cleaner, a plunger, and hot water may be all it takes to clear it out. Other times, the clog may be hard to pinpoint, or the standard solutions do not work. When this is the case, give us a call.

Signs That Tell You Need Drain Cleaning Done Chicago

When Do I Call a Drain Cleaning Expert in Chicago?

Most of the time, drains will clear through, and your water flow will be restored. If, however, you are experiencing repeated clogs the issue may be deeper, and an inside view of your pipes will help you determine your next steps.

Are you tired of spending time, money, or both for a solution that doesn’t seem to last? Our technicians can quickly identify if the problem is in your pipes or the mainline through our advanced camera/sewer inspections. This technology uses state-of-the-art cameras that can pan, tilt, and most importantly travel the length of your pipes.

As the camera travels down the pipe it sends real-time video image transmissions to our trained contractors above. Based on the image feedback, our specialist can identify the location and source of your drain’s problems. The cameras our specialists use can enter pipes as small as two inches in diameter.

Without a visual image, plumbing technicians may only make educated guesses, and guesses can be very expensive if the problem is under your driveway or floor.

Excavating only to discover the guess was off is infuriating and costly. Our technicians can save you the hassle by providing you with an inside look at the world inside your pipes and precise information you can trust.

What Will Your Video Camera Inspection Show?

  • Clogs
  • Root Intrusions
  • Off-grade pipes
  • Corrosion
  • Misalignments
  • Punctures

Understanding Root Intrusion
Many of our clients from Chicago are surprised to learn that roots can intrude into the pipe and create clogs due to root growth within the pipe. But this is a very common problem.

Tree roots can travel a great distance from a nearby properly in their search for moisture. Even if your yard is free of shrubs and landscaping that could be a culprit, do not be quick to rule out this possibility.

If your PVC, Cast Iron, or clay drainage pipe leaks moisture, it will inevitably attract root intrusion. Drainage pipes often create condensation on the exterior of the pipe, acting as a magnet to plants seeking a water source. Once the roots find a hole, separation, or crack within the pipe, the roots begin to grow into the pipe leading to a block.

This is why solutions such as snaking leave you right back where you started within a month or two. Snaking can push past the roots without clearing them, allowing the water to drain and the clog to dissipate. As the roots grow back, the problem resurfaces.

So if you have to deal with a clogged drain, time after time again, call us today to schedule your camera/sewer inspection. The real-time video transmissions will cut to the source of your problem whether it is corrosion, root intrusion, or a host of other possibilities.

Are Camera InspectionsIdeal for Locating Off Grade Pipes and Cracks?

With a camera inspection, knowing the exact location of the problem is a breeze. The camera within the pipe transmits a signal allowing our technician to know and identify the exact location the problem.

This is especially important if the problem is under your driveway or floor. This service will greatly reduce your excavation and restoration costs.

Our skilled technician sticks in a flexible rod with a high resolution camera on its tips. The adjustable rod allows the camera to move in and around the pipe to check for potential problems.

Why Do We Use Video Cameras for Sewer Inspection?

Recovering lost items. Losing something valuable down the drainage can be a hopeless situation. Camera sewage inspection makes the task easy, saves you time and money in recovering sentimental items that accidentally went down the drain.

Scrutinizing potential homes. Potential homeowners generally do not want to inherit plumbing problems from previous homeowners. So, the best way to quickly establish that is to have your homes scheduled for a camera sewage inspection.

Probe the septic system. Camera sewer inspection gives you ample amount information about the health of your septic tank and informs you of any repairs or maintenance needed.

Remodeling investigations. This is quite important if you are remodeling your kitchen or bathroom. This gives you information whether your new kitchen or bathroom can tolerate new additions and rise in waste and flow.

While these are some reasons why you might need to have camera sewer inspection, they can also be beneficial for several other reasons.

No Presumptions
The problem can be determined and fixed right away with camera sewer inspection. Technicians are accurately able to detect any potential obstructions and problems to your sewer with the camera and radio transmitter they have at hand. This additionally saves time and is cost effective.

Determine Possible Problems
A camera sewer inspection can determine all possible types of problems like misaligned pipes, broken, off-grade, or corroded pipes, and root intrusion. The camera can also pinpoint leaks, grease buildup, and obstructions. Inspections can also be done again after the service to make sure that the line has been repaired or cleaned accordingly.

We understand your desire for the lowest prices and provide you with the most competitive rates around.

drain clogged coupon chicago

Why Individuals All Over Illinois Prefer Our Service

Dealing with constantly clogging drains is an obnoxious and messy problem. Many of our customers have learned of the freedom hiring a specialist can provide. Rather than search, find, and fix the problem themselves, they have chosen to put their problem into our capable hands. And the trust is not blind!

All of our technicians have been servicing these counties for years and our proud of giving our customers 100% satisfaction. All of our techs have had thorough background checks and drug screening performed, are fully licensed and insured, and professional in all aspects of their service.

Serious clogs will not be dented by your feeble attempts at snaking and homemade or dangerous commercial drain cleaners. “Knowing the problem is half the solution” are great words of wisdom when it comes to your plumbing problems.

With the right diagnosis, you will be well on your way to obtaining a solution guaranteed to fix your problem.

You can also rest assured that our techs follow sanitation and hygiene protocols, wearing shoe covers and placing drop cloths when necessary. We also make sure to perform a thorough clean-up after each repair or installation.

Contact our trained and insured Chicago plumbers. We are just one phone call away. We’re available 24 hours a day, 7 days a week.

Posted on: August 17, 2018